TL-WPA281/TL-WPA271 Wireless N Powerline Extender
41
Join an existing Powerline Network:
Powerline device A and Powerline device B form a HomeplugAV Network, and Powerline device C
wants to join this network.
Step 1. Press and hold the Pair button on Powerline device C TL-PA211 for 3 to 8 seconds.
Step 2. Press and hold the Pair button on Powerline device A/B for 1 second/3 to 8 seconds.
(This step must be taken within 120 seconds after step 1 is finished.)
Step 3. Wait for about 60 seconds while your Powerline devices are connecting. The Power LED on
Powerline device A/B and C will stop flashing and become solid light when the connection is
made.
) Note:
Step 1.
Step 2.
The sequence of Step 1 and Step 2 can be exchanged.
Leave an existing Powerline Network:
As the figure above shows, Powerline device A, B and C have formed a HomeplugAV Network. The user
wants to remove one device (Powerline adapter C) from this network.
Press and hold the Pair button on Powerline device C for at least 10 seconds. Powerline
device C will reset and restart.
Wait for the reset to complete.
5.3 Reset To reset the Powerline device：
Press and hold the Reset button for about 10 seconds, and then release the button. You will see all
LEDs begin to flash. At this moment, the default settings have been restored.
Be careful, don’t power off when the device is in reset process.