TL-WPA281/TL-WPA271 Wireless N Powerline Extender
30
¾ Simple Application Mapping - The group allows you to choose what type of traffic with the highest
user priority you will use your local device for by pitching on one of the following four radios.
z Internet - The Internet Application Mapping be use to Internet server.
z Online Game - The Online Game Application Mapping be use to Online Game server.
z Audio or Video - The Audio or Video Application Mapping be use to Audio or Video server.
z Voice over IP - The Voice over IP Application Mapping be use to Voice over IP server.
¾ Advanced Priority Mapping: The group sets VLAN priority and TOS priority to CAP mapping and
other priority.
z VLAN Tages - Host frames can be priority classified based on VLAN CoS bits. Each
combination of the CoS bits can be independently assigned to a priority queue.
z TOS Bits - Classification can be based on TOS priority bits in the same manner as the VLAN
CoS bits.
z Unicast Priority - Unicast frames are those destined to a unique MAC addresses. These
frames to CAP1 by default.
z Mcast Priority - Multicast frames not managed by IGMP and broadcast frames such as ARP
frames are transmitted at the specified priority, default is CAP1.
z IGMP Priority - IGMP frames are defined by the Internet Group Management Protocol and
represent management messages passed between various network infrastructure
components.As a manageme re by default classified at the highest
CAP3 by default.
.
voice
f
video and non urgent MMEs, CAP0 and CAP1 are used for delivery of best effort data.
2. If both VLAN and TOS are enabled and a frame is found that contains both, VLAN Tags will
3.7 n helps you to optimize the configuration of your device. You can upgrade the
Powerline Extender to the latest version of firmware as well as backup or restore the device’s
-based management page. Besides, you can find out what
3-26): Firmware Upgrade,
Factory Defaults, Backup & Restore, Reboot, Password and System Log. Clicking any of them will
nt protocol, these frames a
z AV Stream Priority - AV Stream is placed in the specified priority queue, default is CAP2
) Note:
1. CAP3 is the highest priority while CAP0 is the lowest priority.CAP3 is used for the delivery of
and urgent MMEs and control messages such as IGMP and MLD,CAP2 is used for the delivery o
override TOS Bits.
Click the Save button to save your settings.
System Tools System Tools optio
configuration files. It’s suggested that you change the default password to a more secure one because it
controls access to the device’s web
happened to the system in System Log.
There are six submenus under the System Tools menu (shown as Figure