TP-Link TL-WPA271, TL-WPA281 - page 39

TL-WPA281/TL-WPA271 Wireless N Powerline Extender
32
) Note:
The firmware version must correspond to the hardware. The upgrade process takes a few moments and
the Powerline Extender restarts automatically when the upgrade is complete. It is important to keep
power applied during the entire process. Loss of power during the upgrade could damage the Powerline
Extender.
3.7.2 Factory Defaults
for the Selecting System Tools > Factory Defaults allows you to restore the factory default settings
device on the screen shown in Figure 3-28.
Figure 3-28 Restore Factory Defaults
Click Restore to reset all configuration settings to their default values.
• Default User Name: admin
• Default Password: admin
• Default IP Address: 192.168.1.1
• Default Subnet Mask: 255.255.255.0
) Note:
Any settings you have saved will be lost when the default settings are restored.
3.7.3 Backup & Restore
ystem Tools > Backup & Restore allows you to save all configuration settings to your local
a file or restore the device's configuration on the screen shown in Figure 3-29.
Selecting S
computer as
Figure 3-29 Save or Restore the Configuration
Click Backup to save all configuration settings to your local computer as a file.
To restore the device's configuration, follow these instructions:
• Click Browse… to find the configuration file which you want to restore.
• Click Restore to update the configuration with the file whose path is the one you have input or
selected in the blank.