Firmware Upgrade | TP-Link WR-842ND manual

1.Only one user can use the diagnostic tools at one time.

TL-WR842ND300Mbps Multi-Function Wireless N Router

pinging/tracerouting the IP address is successful, but pinging/tracerouting the domain name is not, you might have a name resolution problem. In this case, ensure that the domain name you are specifying can be resolved by using Domain Name System (DNS) queries.

¾IP Address/Domain Name - Enter the IP Address or Domain Name of the PC whose connection you wish to diagnose.

¾Pings Count - Specifies the number of Echo Request messages sent. The default is 4.

¾Ping Packet Size - Specifies the number of data bytes to be sent. The default is 64.

¾Ping Timeout - Time to wait for a response, in milliseconds. The default is 800.

¾Traceroute Max TTL - Set the maximum number of hops (max TTL to be reached) in the path to search for the target (destination). The default is 20.

Click Start to check the connectivity of the Internet.

The Diagnostic Results page displays the result of diagnosis.

If the result is similar to the following screen, the connectivity of the Internet is fine.

Figure 4-100 Diagnostic Results

)Note:

1.Only one user can use the diagnostic tools at one time.

2."Ping Count", "Ping Packet Size" and "Ping Timeout" are Ping Parameters, and "Traceroute Max TTL" is Traceroute Parameter.

4.18.3 Firmware Upgrade

Choose menu “System Tools → Firmware Upgrade”, and then you can update the latest version of firmware for the Router on the following screen.

- 102 -

Image 110

TP-Link WR-842ND manual Firmware Upgrade, Only one user can use the diagnostic tools at one time

Contents

300Mbps Multi-Function Wireless N Router TL-WR842ND COPYRIGHT & TRADEMARKS FCC STATEMENT National restrictions FCC RF Radiation Exposure StatementCE Mark Warning CountryPage EN 301 893 EN 300 328 V1.7.1 EN 301 489-1 V1.8.12008& EN 301 489-17 Product Description 300Mbps Multi-Function Wireless N RouterDECLARATION OF CONFORMITY EN623112008 Chapter 2. Connecting the Router CONTENTSPackage Contents Chapter 3. Quick Installation Guide 4.7.2 Appendix C Specifications Appendix A FAQAppendix B Configuring the PCs Appendix D Glossary Package Contents TL-WR842ND 300Mbps Multi-Function Wireless N Router Chapter 1. Introduction Flexible Access ControlSimple Installation 1.1 Overview of the Router 1.3 Main Features 1.2 Conventions Name 1.4 Panel Layout1.4.1 The Front Panel Status 1.4.2 The Rear Panel ¾ WIFI ON/OFF Press this button to enable or disable Wi-Fi 2.3 Connecting the Router Chapter 2. Connecting the Router2.2 Installation Environment Requirements 2.1 System Requirements 7. Power on your PC and Cable/DSL Modem Figure 2-1 Hardware Installation Chapter 3. Quick Installation Guide 3.1 TCP/IP Configuration 3.2 Quick Installation Guide Please check the connection following these steps Figure 3-3 Log in the Router Figure 3-5 Quick Setup Figure 3-6 WAN Connection Type Figure 3-7 Quick Setup - PPPoE Figure 3-8 Quick Setup - MAC Clone Figure 3-9 Quick Setup - MAC Clone Figure 3-10 Quick Setup - MAC Clone Figure 3-12 Quick Setup - Static IP Figure 3-11 Find MAC Address Figure 3-13 Quick Setup - Wireless z PSK Password - You can enter ASCII or Hexadecimal characters 4.6 Wireless Figure 3-14 Quick Setup - Finish Figure 3-15 Quick Setup - Finish 4.2 Status Chapter 4. Configuring the Router4.1 Login Figure 4-1 Router Status 4.3 Quick SetupPlease refer to 3.2 Quick Installation Guide I. Use the Wi-Fi Protected Setup Button 4.4 WPS II. Enter the client device’s PIN on the Router 300Mbps Multi-Function Wireless N RouterTL-WR842ND III. Enter the Router’s PIN on your client device 4.5 Network4.5.1 WAN Figure 4-6 WAN - Dynamic IP TL-WR842ND 300Mbps Multi-Function Wireless N Router Figure 4-8 WAN - PPPoE down Figure 4-10 WAN - BigPond Cable NSW / ACT - nsw.bigpond.net.au QLD - qld.bigpond.net.au Figure 4-11 WAN - L2TP/Russia L2TP TL-WR842ND 300Mbps Multi-Function Wireless N Router Figure 4-12 PPTP Settings z Static IP - Connections which use static IP address assignment 4.5.2 LANz Dynamic IP - Connections which use dynamic IP address assignment Figure 4-14 MAC Address Clone 4.5.3 MAC CloneFigure 4-13 LAN Only the PC on your LAN can use the MAC Address Clone function 4.6 Wireless4.6.1 Wireless Settings Figure 4-16 Wireless Settings TL-WR842ND 300Mbps Multi-Function Wireless N Router 4.6.2 Wireless Security ¾ SSID - Select the desired SSID from the drop-down list Encryption - You can select either Automatic, or TKIP or AES Figure 4-21 WPA/WPA2 - Personal notice in red as shown in FigureFigure 4-20 WPA/WPA2 - Enterprise 4.6.3 Wireless MAC Filtering To modify or delete an existing entry 4.6.4 Wireless Advanced 4.6.5 Wireless Statistics This page will be refreshed automatically every 5 seconds 4.7.1 DHCP Settings4.7 DHCP 4.7.2 DHCP Clients List Figure 4-29 Address Reservation 4.7.3 Address ReservationTo Reserve an IP address Figure 4-30 Add or Modify an Address Reservation Entry 4.8 VPN 4.8.1 IKE Figure 4-33 IKE Policy Settings 4.8.2 IPsec Figure 4-34 List of IPsec Policy ¾ Policy Name - Enter the name for the IPsec Policy 4.8.3 Security Alliance List Figure 4-36 List of Security Alliance 4.9 USB Settings 4.9.1 Storage Sharing ¾ Used - The used space of the USB driver To set up your FTP Server, please follow the instructions below 4.9.2 FTP Server 3. The max FTP clients number is 4.9.3 Media ServerTo add a new folder, follow the instructions below To set up your media server, please follow the instructions below Figure 4-44 Media Server Setting 4.9.4 Print Server 4.9.5 User Accounts To add a new user account, please follow the steps below 1. The two default user accounts cannot be deleted 2. Please restart the service for the new settings to take effect 4.10 Forwarding 4.10.1 Virtual Servers To set up a virtual server entry Figure 4-52 Add or Modify a Virtual Server Entry 4.10.2 Port Triggering To add a new rule, follow the steps below Figure 4-54 Add or Modify a Triggering Entry 4.10.4 UPnP Once the Router is configured, the operation is as follows4.10.3 DMZ 3. Incoming Ports ranges cannot overlap each other External Port - The port which the Router opened for the application 4.11 Security 4.11.1 Basic Security 4.11.2 Advanced Security Figure 4-59 Advanced Security 4.11.3 Local Management 4.11.4 Remote Management Figure 4-61 Remote Management 4.12 Parental Control To add a new entry, please follow the steps below ¾ Enable - Check this option to enable a specific entry 7. Click the Save button 4.13 Access Control 4.13.1 Rule There are two methods to add a new rule Method One ¾ Host - Here displays the host selected in the corresponding rule If the IP Address is selected, you can see the following item If the Domain Name is selected, you will see the following items Method Two Figure 4-71 Add Internet Access Control Entry 4.13.2 Host Figure 4-72 Host Settings 4.13.3 Target Figure 4-75 Target Settings Figure 4-76 Add or Modify an Access Target Entry Figure 4-77 Add or Modify an Access Target Entry 4.13.4 Schedule To add a new schedule, follow the steps below 4.14 Advanced Routing Figure 4-81 Static Routing 4.14.1 Static Routing ListTo add static routing entries Figure 4-82 Add or Modify a Static Route Entry Other configurations for the entries 4.14.2 System Routing Table 4.15.2 Rules List 4.15.1 Control Settings4.15 Bandwidth Control Figure 4-86 Bandwidth Control Rules List To add/modify a Bandwidth Control rule, follow the steps belowFigure 4-87 Bandwidth Control Rule Settings 4.16 IP & MAC Binding Setting 4.16.1 Binding Settings To find an existing entry, follow the steps below To add IP & MAC Binding entries, follow the steps belowTo modify or delete an existing entry, follow the steps below Figure 4-90 IP & MAC Binding Setting Add & Modify 4.17 Dynamic DNS 4.16.2 ARP List To set up for DDNS, follow these instructions 4.17.1 Comexe.cn DDNS 4.17.2 Dyndns.org DDNS Figure 4-94 Dyndns.org DDNS Settings 4.17.3 No-ip.com DDNS Figure 4-95 No-ip.com DDNS Settings 4.18.1 Time Setting 4.18 System Tools To set Daylight Saving To set time manuallyTo set time automatically Figure 4-98 Time settings 4.18.2 Diagnostic 2. The time will be lost if the router is turned off 4.18.3 Firmware Upgrade 1. Only one user can use the diagnostic tools at one time To upgrade the Routers firmware, follow these instructions below 5 The firmware version must correspond to the hardware All changed settings will be lost when defaults are restored 4.18.4 Factory Defaults4.18.5 Backup & Restore 4.18.6 Reboot 4.18.7 Password 4.18.8 System Log Figure 4-107 Mail Account Settings 4.18.9 Statistics ¾ Sorted Rules - Choose how the displayed statistics are sorted Reset Statistics Table300Mbps Multi-Function Wireless N Router IP/MAC Address Appendix A FAQ 1. How do I configure the Router to access Internet by ADSL users? 3. I want to use Netmeeting, what do I need to do? Figure A-3 MAC Clone Figure A-6 DMZ Figure A-4 Virtual ServersFigure A-5 Add or Modify a Virtual server Entry 4. I want to build a WEB Server on the LAN, what should I do? Figure A-8 Remote Management Figure A-9 Virtual Servers 5. The wireless stations cannot connect to the Router Appendix B Configuring the PCs 1. Install TCP/IP component Figure B-2 Figure B-3 General Appendix C SpecificationsWireless Environmental and Physical Appendix D Glossary hosts to the Internet over an always-on connection by simulating a dial-up connection