TP-Link WR-842ND manual There are two methods to add a new rule Method One, TL-WR842ND

TL-WR842ND

300Mbps Multi-Function Wireless N Router

¾Enable Internet Access Control - Select the check box to enable the Internet Access Control function, so the Default Filter Policy can take effect.

¾Rule Name - Here displays the name of the rule and this name is unique.

¾Host - Here displays the host selected in the corresponding rule.

¾Target - Here displays the target selected in the corresponding rule.

¾Schedule - Here displays the schedule selected in the corresponding rule.

¾Enable - Here displays the status of the rule, enabled or not. Check this option to enable a specific entry.

¾Modify - Here you can edit or delete an existing rule.

¾Setup Wizard - Click the Setup Wizard button to create a new rule entry.

¾Add New... - Click the Add New... button to add a new rule entry.

¾Enable All - Click the Enable All button to enable all the rules in the list.

¾Disable All - Click the Disable All button to disable all the rules in the list.

¾Delete All - Click the Delete All button to delete all the entries in the table.

¾Move - You can change the entry’s order as desired. Enter in the first box the ID number of the entry you want to move and in the second box another ID number, and then click the Move button to change the entries’ order.

¾Next - Click the Next button to go to the next page.

¾Previous - Click the Previous button to return to the previous page.

There are two methods to add a new rule.

Method One:

1.Click Setup Wizard button and the next screen will appear as shown in Figure 4-67.

Figure 4-67 Quick Setup – Create a Host Entry

¾Host Description - In this field, create a unique description for the host (e.g. Host_1).

- 78 -