TP-Link WR-842ND manual TL-WR842ND, 300Mbps Multi-Function Wireless N Router

TL-WR842ND

300Mbps Multi-Function Wireless N Router

You can also keep the default WPS Status as Enabled and click the Add device button in Figure 4-2,then Choose “Press the button of the new device in two minutes” and click Connect. (Shown in the following figure)

Figure 4-3 Add A New Device

Step 2: Press and hold the WPS button of the client device directly.

Step 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process.

Step 4: When the WPS LED is on, the client device has successfully connected to the Router.

Step 5: Refer back to your client device or its documentation for further instructions.

II. Enter the client device’s PIN on the Router

Use this method if your client device has a Wi-Fi Protected Setup PIN number.

Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-2,then the following screen will appear.

Figure 4-4 Add A New Device

Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then click Connect button.

Step 3: “Connect successfully” will appear on the screen of Figure 4-4,which means the client device has successfully connected to the Router.

- 22 -