10 WAN - BigPond Cable | TP-Link WR-842ND instruction

Figure 4-10 WAN - BigPond Cable

TL-WR842ND300Mbps Multi-Function Wireless N Router

these fields blank will work.

¾ISP Specified IP Address - If your ISP does not automatically assign IP addresses to the Router during login, please click “Use IP address specified by ISP” check box and enter the IP address provided by your ISP in dotted-decimal notation.

¾Detect Online Interval - The Router will detect Access Concentrator online at every interval. The default value is “0”. You can input the value between “0” and “120”. The value “0” means no detect.

¾Primary DNS/Secondary DNS - If your ISP does not automatically assign DNS addresses to the Router during login, please click “Use the following DNS servers” check box and enter the IP address in dotted-decimal notation of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it as well.

Click the Save button to save your settings.

4.If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select BigPond Cable. And you should enter the following parameters (Figure 4-10):

Figure 4-10 WAN - BigPond Cable

¾User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive.

¾Auth Server - Enter the authenticating server IP address or host name.

¾Auth Domain - Type in the domain suffix server name based on your location.

- 28 -

Image 36

TP-Link WR-842ND manual TL-WR842ND 300Mbps Multi-Function Wireless N Router, 10 WAN - BigPond Cable

Contents

300Mbps Multi-Function Wireless N Router TL-WR842ND COPYRIGHT & TRADEMARKS FCC STATEMENT FCC RF Radiation Exposure Statement CE Mark WarningNational restrictions CountryPage Product Description 300Mbps Multi-Function Wireless N Router DECLARATION OF CONFORMITYEN 301 893 EN 300 328 V1.7.1 EN 301 489-1 V1.8.12008& EN 301 489-17 EN623112008 CONTENTS Package ContentsChapter 2. Connecting the Router Chapter 3. Quick Installation Guide 4.7.2 Appendix A FAQ Appendix B Configuring the PCsAppendix C Specifications Appendix D Glossary Package Contents TL-WR842ND 300Mbps Multi-Function Wireless N Router Flexible Access Control Simple InstallationChapter 1. Introduction 1.1 Overview of the Router 1.3 Main Features 1.2 Conventions 1.4 Panel Layout 1.4.1 The Front PanelName Status 1.4.2 The Rear Panel ¾ WIFI ON/OFF Press this button to enable or disable Wi-Fi Chapter 2. Connecting the Router 2.2 Installation Environment Requirements2.3 Connecting the Router 2.1 System Requirements 7. Power on your PC and Cable/DSL Modem Figure 2-1 Hardware Installation Chapter 3. Quick Installation Guide 3.1 TCP/IP Configuration 3.2 Quick Installation Guide Please check the connection following these steps Figure 3-3 Log in the Router Figure 3-5 Quick Setup Figure 3-6 WAN Connection Type Figure 3-7 Quick Setup - PPPoE Figure 3-8 Quick Setup - MAC Clone Figure 3-9 Quick Setup - MAC Clone Figure 3-10 Quick Setup - MAC Clone Figure 3-12 Quick Setup - Static IP Figure 3-11 Find MAC Address Figure 3-13 Quick Setup - Wireless z PSK Password - You can enter ASCII or Hexadecimal characters 4.6 Wireless Figure 3-14 Quick Setup - Finish Figure 3-15 Quick Setup - Finish Chapter 4. Configuring the Router 4.1 Login4.2 Status 4.3 Quick Setup Please refer to 3.2 Quick Installation GuideFigure 4-1 Router Status I. Use the Wi-Fi Protected Setup Button 4.4 WPS 300Mbps Multi-Function Wireless N Router TL-WR842NDII. Enter the client device’s PIN on the Router 4.5 Network 4.5.1 WANIII. Enter the Router’s PIN on your client device Figure 4-6 WAN - Dynamic IP TL-WR842ND 300Mbps Multi-Function Wireless N Router Figure 4-8 WAN - PPPoE down Figure 4-10 WAN - BigPond Cable NSW / ACT - nsw.bigpond.net.au QLD - qld.bigpond.net.au Figure 4-11 WAN - L2TP/Russia L2TP TL-WR842ND 300Mbps Multi-Function Wireless N Router Figure 4-12 PPTP Settings 4.5.2 LAN z Dynamic IP - Connections which use dynamic IP address assignmentz Static IP - Connections which use static IP address assignment 4.5.3 MAC Clone Figure 4-13 LANFigure 4-14 MAC Address Clone 4.6 Wireless 4.6.1 Wireless SettingsOnly the PC on your LAN can use the MAC Address Clone function Figure 4-16 Wireless Settings TL-WR842ND 300Mbps Multi-Function Wireless N Router 4.6.2 Wireless Security ¾ SSID - Select the desired SSID from the drop-down list Encryption - You can select either Automatic, or TKIP or AES notice in red as shown in Figure Figure 4-20 WPA/WPA2 - EnterpriseFigure 4-21 WPA/WPA2 - Personal 4.6.3 Wireless MAC Filtering To modify or delete an existing entry 4.6.4 Wireless Advanced 4.6.5 Wireless Statistics 4.7.1 DHCP Settings 4.7 DHCPThis page will be refreshed automatically every 5 seconds 4.7.2 DHCP Clients List 4.7.3 Address Reservation To Reserve an IP addressFigure 4-29 Address Reservation Figure 4-30 Add or Modify an Address Reservation Entry 4.8 VPN 4.8.1 IKE Figure 4-33 IKE Policy Settings 4.8.2 IPsec Figure 4-34 List of IPsec Policy ¾ Policy Name - Enter the name for the IPsec Policy 4.8.3 Security Alliance List Figure 4-36 List of Security Alliance 4.9 USB Settings 4.9.1 Storage Sharing ¾ Used - The used space of the USB driver To set up your FTP Server, please follow the instructions below 4.9.2 FTP Server 4.9.3 Media Server To add a new folder, follow the instructions below3. The max FTP clients number is To set up your media server, please follow the instructions below Figure 4-44 Media Server Setting 4.9.4 Print Server 4.9.5 User Accounts To add a new user account, please follow the steps below 1. The two default user accounts cannot be deleted 2. Please restart the service for the new settings to take effect 4.10 Forwarding 4.10.1 Virtual Servers To set up a virtual server entry Figure 4-52 Add or Modify a Virtual Server Entry 4.10.2 Port Triggering To add a new rule, follow the steps below Figure 4-54 Add or Modify a Triggering Entry Once the Router is configured, the operation is as follows 4.10.3 DMZ4.10.4 UPnP 3. Incoming Ports ranges cannot overlap each other External Port - The port which the Router opened for the application 4.11 Security 4.11.1 Basic Security 4.11.2 Advanced Security Figure 4-59 Advanced Security 4.11.3 Local Management 4.11.4 Remote Management Figure 4-61 Remote Management 4.12 Parental Control To add a new entry, please follow the steps below ¾ Enable - Check this option to enable a specific entry 7. Click the Save button 4.13 Access Control 4.13.1 Rule There are two methods to add a new rule Method One ¾ Host - Here displays the host selected in the corresponding rule If the IP Address is selected, you can see the following item If the Domain Name is selected, you will see the following items Method Two Figure 4-71 Add Internet Access Control Entry 4.13.2 Host Figure 4-72 Host Settings 4.13.3 Target Figure 4-75 Target Settings Figure 4-76 Add or Modify an Access Target Entry Figure 4-77 Add or Modify an Access Target Entry 4.13.4 Schedule To add a new schedule, follow the steps below 4.14 Advanced Routing 4.14.1 Static Routing List To add static routing entriesFigure 4-81 Static Routing Figure 4-82 Add or Modify a Static Route Entry Other configurations for the entries 4.14.2 System Routing Table 4.15.1 Control Settings 4.15 Bandwidth Control4.15.2 Rules List To add/modify a Bandwidth Control rule, follow the steps below Figure 4-87 Bandwidth Control Rule SettingsFigure 4-86 Bandwidth Control Rules List 4.16 IP & MAC Binding Setting 4.16.1 Binding Settings To add IP & MAC Binding entries, follow the steps below To modify or delete an existing entry, follow the steps belowTo find an existing entry, follow the steps below Figure 4-90 IP & MAC Binding Setting Add & Modify 4.17 Dynamic DNS 4.16.2 ARP List To set up for DDNS, follow these instructions 4.17.1 Comexe.cn DDNS 4.17.2 Dyndns.org DDNS Figure 4-94 Dyndns.org DDNS Settings 4.17.3 No-ip.com DDNS Figure 4-95 No-ip.com DDNS Settings 4.18.1 Time Setting 4.18 System Tools To set time manually To set time automaticallyTo set Daylight Saving Figure 4-98 Time settings 4.18.2 Diagnostic 2. The time will be lost if the router is turned off 4.18.3 Firmware Upgrade 1. Only one user can use the diagnostic tools at one time To upgrade the Routers firmware, follow these instructions below 5 The firmware version must correspond to the hardware 4.18.4 Factory Defaults 4.18.5 Backup & RestoreAll changed settings will be lost when defaults are restored 4.18.6 Reboot 4.18.7 Password 4.18.8 System Log Figure 4-107 Mail Account Settings 4.18.9 Statistics ¾ Sorted Rules - Choose how the displayed statistics are sorted Statistics Table 300Mbps Multi-Function Wireless N RouterReset IP/MAC Address Appendix A FAQ 1. How do I configure the Router to access Internet by ADSL users? 3. I want to use Netmeeting, what do I need to do? Figure A-3 MAC Clone Figure A-4 Virtual Servers Figure A-5 Add or Modify a Virtual server EntryFigure A-6 DMZ 4. I want to build a WEB Server on the LAN, what should I do? Figure A-8 Remote Management Figure A-9 Virtual Servers 5. The wireless stations cannot connect to the Router Appendix B Configuring the PCs 1. Install TCP/IP component Figure B-2 Figure B-3 Appendix C Specifications WirelessGeneral Environmental and Physical Appendix D Glossary hosts to the Internet over an always-on connection by simulating a dial-up connection