Features and Benefits

Easy to Service

Because today’s owners are very cost- conscious when it comes to service and maintenance, theTrane Voyager was designed with direct input from service contractors.This valuable information helped to design a product that would get the serviceman off the job quicker and save the owner money. Voyager does this by offering:

A Simpler Design

The Voyager design uses fewer parts than previous units. Since it is simpler in design, it is easier to diagnose.

Micro

The Micro requires no special tools to run the Voyager unit through its paces. Simply place a jumper betweenTest 1 andTest 2 terminals on the Low Voltage Terminal Board and the unit will walk through its operational steps automatically.

—The unit automatically returns control to the zone sensor after stepping through the test mode a single time, even if the jumper is left on the unit.

As long as the unit has power and the “system on” LED is lit, the Micro is operational.The light indicates that the Micro is functioning properly.

The Micro features expanded diagnostic capabilities when utilized withTrane’s Integrated Comfort™ Systems.

Some Zone Sensor options have central control panel lights which indicate the mode the unit is in and possible diagnostic information (dirty filters for example).

Easy Access LowVoltageTerminal Board

Voyager’s Low VoltageTerminal Board is external to the electrical control cabinet. It is extremely easy to locate and attach the thermostat wire.This is another cost and time-saving installation feature.

Value

Low Ambient Cooling

All Voyager Commercial units have cooling capabilities down to 0 F as standard.

Power Exhaust Option

Provides exhaust of the return air when using an economizer to maintain proper building pressurization. Great for relieving most building overpressurization problems.

Micro Benefits

The Micro in theVoyager units has built- in anti-short-cycle timer, time delay relay and minimum “on” time controls.These controls are functions of the Micro and are factory tested to assure proper operation.

The Micro softens electrical “spikes” by staging on fans, compressors and heaters.

Intelligent Fallback is a benefit to the building occupant. If a component goes astray, the unit will continue to operate at predetermined temperature setpoint.

Intelligent Anticipation is a standard feature of the Micro. It functions constantly as the Micro and zone sensor work together in harmony to provide tighter comfort control than conventional electro-mechanical thermostats.

Horizontal Discharge with Power Exhaust Option

8

RT-PRC007-EN

Page 7 Page 9
Page 8
Image 8
Trane RT-PRC007-EN manual Easy to Service, Value
Page 7 Page 9

RT-PRC007-EN specifications

The Trane RT-PRC007-EN is a part of Trane’s highly regarded line of air-cooled chillers, designed to provide exceptional performance and efficiency for a variety of commercial applications. This model is known for its robust engineering and cutting-edge technologies, making it a favored choice among facility managers and HVAC professionals.

One of the key features of the RT-PRC007-EN is its energy efficiency. Its advanced compressor design, alongside innovative heat exchanger technology, allows it to achieve significant energy savings, meeting or exceeding standards set by the Department of Energy. This efficiency not only results in lower operational costs but also contributes to a smaller carbon footprint, making it an environmentally friendly choice.

The chiller is equipped with variable speed compressors which adjust their output in relation to the cooling demand. This feature ensures optimal performance at all times, reducing energy consumption during partial load operations. Additionally, the RT-PRC007-EN incorporates Trane's unique Adaptive Control technology. This intelligent control system continuously monitors system parameters and environmental conditions, optimizing performance in real-time to ensure reliable operation.

Another standout characteristic of the RT-PRC007-EN is its quiet operation. The inclusion of sound-dampening technology and strategically placed acoustic insulation allows this chiller to operate with minimal noise, making it suitable for installations in noise-sensitive environments like hospitals or schools.

Durability is another hallmark of the RT-PRC007-EN. Built with high-quality materials, it is designed to withstand harsh operating conditions. Its corrosion-resistant components ensure longevity and reduce the need for extensive maintenance, making it a reliable choice for operators.

Lastly, the RT-PRC007-EN comes with a variety of customization options, including different refrigerant types, control systems, and capacity configurations. This flexibility allows it to adapt to the specific needs of different applications and building designs.

In summary, the Trane RT-PRC007-EN represents a fusion of efficiency, reliability, and advanced technology, making it an excellent option for those seeking a cutting-edge air-cooled chiller for their commercial HVAC needs.
Top Page Image Contents