Transcend Information 630 user manual Basic Operation, Charging the Battery, Power on

Basic Operation

Before using the T.sonic™ 630 for the first time you need to charge the internal battery for at least 12 hours by plugging it into a computer using the Mini USB to USB A-Type cable.

Charging the Battery

Plug the small end of the Mini USB to USB A-Type cable into the Mini USB connector on the T.sonic™ 630 and plug the large end of the cable into an available USB port on your desktop, or notebook computer. The T.sonic™ 630’s internal Li-ion battery will begin charging.

Figure 3. Connecting to a Computer

Power ON

Press and Hold the “PLAY/PAUSE/PWR ON-OFF”button to Power ON the T.sonic™ 630. An animated logo will appear on the OLED Display. After the startup screen disappears the player will revert to the default MUSIC Mode screen, you can now begin to use the T.sonic™ 630.

™It takes a few seconds to Power ON the unit.

™When powering on the unit, if the LOCK icon appears on the OLED Display, this means that the

T.sonic™ 630’s “LOCK” switch is on. You must switch off the “LOCK” before you can Power ON the T.sonic™ 630.

7

Player Controls