Troubleshooting︱
If a problem occurs with your MP650, please first check the information listed below before taking your MP650 for repair. If you are unable to remedy a problem from the following hints, please consult your dealer, service center, or local Transcend branch office. We also have FAQ and Support services on our website at http://www.transcendusa.com.
Operating system cannot detect the MP650
Check the following:
1.Is your MP650 properly connected to the USB port? If not, unplug it and plug it in again.
2.Is your MP650 connected to the Mac keyboard? If yes, unplug it and plug it into an available USB port on your Mac Desktop.
3.Is the USB port enabled? If not, refer to the user‟s manual of your computer (or motherboard) to enable it.
Cannot Power ON
Check the following:
1.Is the MP650 connected to your computer? If yes, unplug it.
2.Is the Hold switch enabled? If yes, switch it to the “OFF” position.
3.Is the battery out of power? If yes, please recharge the battery.
Cannot transfer MP3, WMA,
Uninstall and
Buttons aren’t working
Is the Hold switch enabled? If yes, set it to the “OFF” position.
Cannot hear track playback
1.Have you downloaded any music files onto the Digital Music Player? If no, then you must first do so from your computer or the Internet. (Only Mpeg I Layer 3 and WMA files compressed at a rate of
2.Are the earphones properly connected to the earphones jack? If not, reconnect them.
3.Is the volume loud enough? If not, increase the volume level until the music can be heard.
Track name does NOT display correctly on the screen
1.The default language of the Digital Music Player is English. Please set the language option first.
2.ID3 tag information has display priority on the screen of the Digital Music Player. You can modify the ID3 tag by using Windows Media Player or Winamp.
3.If the ID3 tag is empty, just the file name will be displayed on the screen.
Cannot enter the RECORD Mode
To make sure the recorded file will not be lost, two safety mechanisms are provided.
1.If the remaining battery capacity is less than 10%, you cannot enter the RECORD Mode.
2.During recording, if the remaining battery capacity goes below 10% the Digital Music Player will automatically save the recording.
Track playback sounds intermittent
39
