GENERAL

TROUBLESHOOTING

Symptom

Check Points

Page

 

Colors in the monitor screen

Is the SC phase adjusted properly?

P. 13

 

are abnormal. (During

 

 

 

 

Video

genlocking)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

troubles Synchronization is not

Are the BB or VBS signals applied to the GENLOCK INPUT

P. 13

 

possible.

connectors?

 

 

 

 

 

Is the VCR playback signal supplied directly without passing

 

 

 

 

 

through a TBC?

 

 

 

 

 

 

 

 

 

 

Pressing the corresponding

Functions that are not available on the camera cannot be

 

 

 

 

 

 

 

 

button cannot start the

controlled.

 

 

 

 

operation.

Check the camera functions again.

 

 

 

 

<EXT> is displayed on the LCD.

 

 

 

 

 

 

 

 

 

 

 

The LCD display keeps on

Are cables connected properly?

P. 8

 

displaying "NOW INITIALIZING

Are the power switches of the RM-P210 and camera set to ON?

 

 

 

 

JUST A MOMENT" or "PLEASE Is the MODE (RM/VTR) switch on the camera adapter set to

 

 

 

 

CHECK THE CAMERA".

“RM”?

 

 

 

 

 

 

 

 

 

 

LCD display shows "---".

The connected camera does not have the assigned function.

P. 25

 

 

Check the camera functions again and assign the proper

 

 

 

 

 

functions to the F1 to F4 keys.

 

 

 

 

 

 

 

 

 

Control

White-balance adjustment

Is the W.BAL switch set to A or B?

P. 18

cannot be started.

Is FAS or FAW ON (which is indicated by the lighting of the AUTO

 

 

 

troubles

 

 

 

 

lamp)?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

White-balance adjustment will

Are the color temperature filters and lighting conditions appropriate?

P. 18

 

not complete.

Does the object have colors?

 

 

 

 

 

 

 

 

 

 

The tally lamp does not light.

Is the tally system of the RM-P210 compatible with that of the

P. 14

 

 

camera system?

 

 

 

 

 

The RM-P210 has been set at the factory in the “make contact

 

 

 

 

 

mode”. If it is required to set it to the “voltage supplied mode”, the

 

 

 

 

 

setting of the internal circuitry should be changed; consult your

 

 

 

 

 

nearest JVC-authorized service agent. (The modification will then

 

 

 

 

 

be carried out with charge.)

 

 

 

 

 

 

 

 

 

 

Intercom is not possible.

Is the headset impedance suitable? (Earphone: 50 W to 300 W/

P. 14

 

 

1 kHz. Microphone: Carbon).

 

 

 

30

Page 30
Image 30
JVC RM-P210 manual Troubleshooting, Check the Camera