Transition Networks SISTF1010-150-LR(T) installation manual Wall mounting

Transition Networks SISTF1010-150-LR(T) Industrial Unmanaged Switch

Wall mounting

Wall mount	The Industrial Switch includes a wall mount bracket and screws in the contents of the shipping
bracket	package. The wall mount bracket can be attached to the rear panel of the Industrial Switch to
	enable mounting to a vertical surface such as the wall of an enclosure. Locate the bracket (1)
	and screws (6) and follow the steps below to install the bracket on the Industrial Switch.
Wall mount	To install the wall mount bracket to the Industrial Switch, see Figure 6 and do the following:

bracket install

	Step	Action
	1.	Remove existing screws (3) and DIN-Rail bracket from rear of Industrial Switch.
	2.	Locate wall mount bracket and screws (6) from Industrial Switch packaging.
	3.	Place bracket in correct orientation as shown and insert and tighten screws to
		secure bracket to rear of Industrial Switch.
	4.	Mount assembled device to a wall per locally accepted practices for anchoring
		and securing. (Wall mount screws not included.)
Locate wall mount	2	3	Screw bracket onto rear
			of Industrial Switch
brackets and screws

1	Remove screws and
	DIN rail bracket

Figure 6: Installing wall mount bracket to Industrial Switch

10 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600