Transition Networks SISTF1010-150-LR(T) installation manual Copper RJ-45 cable specifications

SISTF1010-150-LR(T) Industrial Unmanaged Switch Transition Networks

Copper (RJ-45) cable specifications

Copper cabling Shielded twisted-pair (STP) or unshielded twisted-pair (UTP) cabling may be used and can be configured as either Straight-through or crossover – see figure 16.

Figure 16: Straight-Through and Crossover Cables

Note: The AutoCrossTM feature determines the characteristics of the cable connection and automatically configures the unit to link up, regardless of the cable configuration, allowing either straight-through (MDI) or crossover (MDI-X) cables to be used. (Requires no operator intervention.). See Advanced Features section for more information.

Copper cable specifications

RJ-45 pinouts

Wire category:	Category 5 (minimum)
Attenuation:	22.0 dB /100m @ 100 MHz
Gauge:	24 to 22 AWG
Maximum cable distance:	100 meters (328 ft)

Figure 17 shows the RJ-45 connector pin assignment chart.

No	MDI Signal Name	MDI-X Signal Name
1	Receive Data + (RD+)	Transmit Data + (TD+)
2	Receive Data - (RD-)	Transmit Data - (TD-)
3	Transmit Data + (TD+)	Receive Data + (RD+)
6	Transmit Data - (TD-)	Receive Data - (RD-)

Figure 17: RJ-45 Connector Pin Assignment Chart

Note: The Industrial Switch is configured as a MDI-X device.

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 21