2. Hardware Installation
Installing Two Stand Alone Fiber Converters Together
1.Connect an RJ-45 Ethernet cable from the Ethernet port on the fiber converters to an Ethernet port on your switch (e.g TE100-S24g).
2.Connect the fiber cable to the fiber converters.
3.Connect the power adapter to the fiber converter.
Note:
For the TFC-110MM/MST/MSC/110S15/S15i/S30/S30i/S60/S60i/S100, the TX and RX cables must be reversed on the opposite fiber connection
TFC-15MS100 converts Multi-Mode to Single-Mode fiber, it can be connected to a switch with Multi-Mode SC-type fiber connection (e.g TEG-424WS with fiber modules) to extend the distance up to 15km with Single-Mode fiber.
Cabling
•Multi-Mode Fiber Optic Cable: TFC-110MSC, TFC-110MST, TFC-110MM
•Single-Mode Fiber Optic Cable: TFC-110S15, TFC-110S30, TFC-110S60, TFC-110S100, TFC-110S15i, TFC-110S30i, TFC-110S60i
•Single Strand Fiber Optic Cable: TFC-110S20D3, TFC-110S20D5, TFC-110S20D3i, TFC-110S20D5i, TFC-110S40D3i, TFC-110S40D5i
