TRENDnet TEG-S4000 manual Ports 10/100Base-TX Module Features

	Red Full Duplex/Col indicators are
	illuminated when that port is in full duplex
Full	mode. The indicator is off when that port is
	in half duplex mode.
Duplex/Col
	When a collision occurs on the network
	connected to a port, that Full Duplex/Col
	indicator blinks.
	Green 100Mbps indicators are illuminated
100Mbps	when the port is operating in 100Mbps
	mode. The indicator is off when the port is
	operating in 10Mbps mode.

Power Port

The power port accepts the power plug.

Power Switch

The power switch, located on the rear panel, controls the power supply

8 ports 10/100Base-TX Module

Figure 1-4. 8 port 10/100Base-TX Module

When installed into a 4-Slot Modular Switch, the 10/100Base-TX Module provides 8x 10/100Mbps Switch ports which can connect the 4-Slot Modular Switch to a 10Mbps or 100Mbps hub or end station.

8 Ports 10/100Base-TX Module Features

8x 10/100Base-TX N-Way Switch ports.

Conforms to IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX and IEEE 802.3x Ethernet Standards

Store and forward switch architecture for abnormal packet filtering

Support for half and full duplex on all ports

Back-plane up to 2.4Gbps

256K bytes Packet Buffer

Automatic address learning with 4K address entry storage