TRENDnet TEG-S4000 manual Ports 100Base-FX Fiber Module Features, Port 100Base-FX Front View

2 ports 100Base-FX Fiber Module Features

Conforms to IEEE 802.3u Fast Ethernet standard

Support for SC or ST fiber connectors (optional)

Supports half and full duplex modes via DIP switches

Store-and-forward switch architecture for abnormal packet filtering

2 switching 100Mbps Fiber Ethernet ports

Back-plane up to 2.4Gbps

5 Mbytes Packet Buffer

Automatic address learning with 12K address entry storage

Filtering and forwarding rate of 148,800 packets per second

100Base-FX uses 62.5/125 micron multi-mode fiber or 8/125 micron single mode fiber for single mode type module.

4 Ports 100Base-FX Fiber Module

Figure 1-8. 4 port 100Base-FX Front View

When installed into a 4-Slot Modular Switch, this Module provides 4 x 100Mbps Fast Ethernet fiber ports which can be used to:

Connect the Switch to the backbone of your network; that is, to a basement switch, hub or router.

Connector the Switch to a 100Mbps server or end station.

An ST (or SC) connector provides the link to the multi-mode fiber cabling and three LEDs show five status of the Module at-a glance. A DIP-switch sets the operating mode to half duplex or full duplex (default).