CONFIGURATION

First make sure that the network connections are functioning normally.

This WLAN Router can be configured using Internet Explorer 5.0 or newer web browser versions.

Login to the WLAN Router through Wireless LAN

Before configuring the WLAN Router through WLAN, make sure that the SSID, Channel and the WEP is set properly.

The default setting of the WLAN Router that you will use:

9SSID: TRENDnet

9Channel: 6

9Security: disable

Login to the WLAN Router

Before you configure this device, note that when the WLAN Router, make sure the host PC must be set on the IP subnet that can be accessed by the xDSL/Cable modem. For example, when the default network address of the xDSL/Cable modem Ethernet interface is 192.168.10.x, then the host PC should be set at 192.168.10.xxx (where xxx is a number between 2 and 254), and the default subnet mask is 255.255.255.0.

Using the Web Browser

1.Open Internet Explorer 5.0 or above Internet browser.

2.Enter IP address http://192.168.10.1 (the factory-default IP address setting) to the URL web address location.

3.When the following dialog box appears, enter the user name and password to login to the main configuration window, the default username and password is “admin”.

12

Page 18
Image 18
TRENDnet TEW-652BRP manual Login to the Wlan Router through Wireless LAN, Using the Web Browser