Manuals / TRENDnet / Computer Equipment / Network Router

TRENDnet TEW-652BRP Hardware Installation, Front Panel, Power, System, WAN Link/ACT, Wlan Act

Models: TEW-652BRP

1 62

Download 62 pages 29.11 Kb

Page 11

HARDWARE INSTALLATION

HARDWARE INSTALLATION

Front Panel

The figure below shows the front panel of the IEEE 802.11b/g/n Wireless Home Router.

Front Panel

POWER

This indicator lights green when the hub is receives power, otherwise it is off.

SYSTEM

This indicator blinking green means the WLAN Router is working successfully. Otherwise, this indicator always on or off means the function of the WLAN Router has failed.

WAN (Link/ACT)

The indicators light green when the WAN port is connected to a xDSL/Cable modem successfully.

The indicators blink green while the WAN port was transmitting or receiving data from the xDSL/Cable modem.

WLAN (ACT)

This indicator lights green when there are wireless devices connected and transmitting data to the WLAN Router.

LAN (Link/ACT)

These indicators light green when the LAN ports were connected successfully. These indicators blinking green while the LAN ports were accessing data.

5

Image 11

TRENDnet TEW-652BRP manual Hardware Installation, Front Panel, Power, System, WAN Link/ACT, Wlan Act, LAN Link/ACT

Contents

Page Federal Communication Commission Interference Statement Wireless LAN, Health and Authorization for useRegulatory notes and statements Regulatory Information/disclaimersEN 300 328 V1.7.1 Europe - EU Declaration of ConformityEN 60 950-1 2001 +A11 EN 50385Česky Czech Dansk Danish Deutsch German Eesti Estonian English 0560PC NETWORK TCP/IP SETTING TABLE OF CONTENTUNPACKING AND SETUP HARDWARE INSTALLATIONT ECHNICAL S PECIFICATIONS Overview of this User’s Guide ABOUT THIS GUIDEPurpose Terms/UsageFile sharing Applications Broadband Internet accessINTRODUCTION Resource sharingSupported Features Unpacking UNPACKING AND SETUPSetup SYSTEM HARDWARE INSTALLATIONPOWER Front PanelPOWER RESETRear Panel AntennaPush this button to execute the Wi-Fi Protected Setup process Side PanelWPS side panel Check the installation Hardware connections Connecting the WLAN RouterWindows 95/98/ME PC NETWORK TCP/IP SETTING1. In the “Local area network status” window, click on “Properties.” 3. Set both “IP address” and “DNS” to Automatic configurationWindows 2. Set “DNS” to “Obtain DNS server address automatically.” Windows XP / Vista1. Set “IP address” to “Obtain an IP address automatically.” Using the Web Browser CONFIGURATIONLogin to the WLAN Router through Wireless LAN Login to the WLAN RouterSetup Wizard The WLAN Router will attempt to auto detect your Internet Connection Step 3 Set LAN connection and DHCP serverStep 4 Set Internet connection Obtain IP automatically DHCP client Fixed IP Address PPPoE to obtain IP automatically PPPoE with a fixed IP address PPTP L2TP Big Pond CableAustralia Russia PPPoE Russia PPTP Step 6 Setup completed Step 5 Set Wireless LAN connectionLAN & DHCP Server Advanced configuration MainStart IP Type an IP address to serve as the start of the IP range that DHCP will use to assign IP addresses to all LAN devices connected to the WLAN Router Password Time Dynamic DNS Basic WirelessSecurity WPA/WPA2/WPA-Auto Security WEP EncryptionAdvanced RADIUS ServerWPA-PSK/WPA2-PSK Security Wi-Fi Protected Setup Device Information StatusPage Log Setting MAC Address Displays the wireless client’s MAC address StatisticWireless Static RoutingDynamic Routing Table Filters AccessMAC Filters Domain/URL Blocking Protocol/IP Filters Virtual Server Special AP Page Firewall Settings Remote Management ManagementRestart ToolsSettings Ping Test FirmwarePhysical and Environmental TECHNICAL SPECIFICATIONSGeneral 3 Years Limited WarrantyTEW-652BRP