Manuals / TRENDnet / Computer Equipment / Network Router

TRENDnet TEW-652BRP manual Wireless, Basic

Models: TEW-652BRP

1 62

Download 62 pages 29.11 Kb

Page 36

Wireless

Wireless

This section enables users to configuration the wireless communications parameters for the WLAN Router.

Basic

This page allow user to enable and disable the wireless LAN function, create a SSID, and select the channel for wireless communications.

Enable/Disable: Enables or disables wireless LAN via the WLAN Router.

SSID: Type an SSID in the text box. The SSID of any wireless device must match the SSID typed here in order for the wireless device to access the LAN and WAN via the WLAN Router.

Channel: Select a transmission channel for wireless communications. The channel of any wireless device must match the channel selected here in order for the wireless device to access the LAN and WAN via the WLAN Router.

802.11Mode: Select one of the following:

z802.11b only - Select if you are using 802.11b wireless clients only. z802.11g only - Select if you are using 802.11g wireless clients only. z802.11n only - Select if you are using 802.11n wireless clients only.

zMixed 802.11b and 802.11g - Select if you are using both 802.11b and 802.11g wireless clients.

zMixed 802.11n, 802.11g, and 802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.

Channel Width: Select the Channel Width:

30

Image 36

TRENDnet TEW-652BRP manual Wireless, Basic

Contents

Page Wireless LAN, Health and Authorization for use Regulatory notes and statementsRegulatory Information/disclaimers Federal Communication Commission Interference StatementEurope - EU Declaration of Conformity EN 60 950-1 2001 +A11EN 50385 EN 300 328 V1.7.10560 Česky Czech Dansk Danish Deutsch German Eesti Estonian EnglishTABLE OF CONTENT UNPACKING AND SETUPHARDWARE INSTALLATION PC NETWORK TCP/IP SETTINGT ECHNICAL S PECIFICATIONS ABOUT THIS GUIDE PurposeTerms/Usage Overview of this User’s GuideApplications Broadband Internet access INTRODUCTIONResource sharing File sharingSupported Features UNPACKING AND SETUP SetupUnpacking HARDWARE INSTALLATION POWERFront Panel SYSTEMRESET Rear PanelAntenna POWERSide Panel WPS side panelPush this button to execute the Wi-Fi Protected Setup process Hardware connections Connecting the WLAN Router Check the installationPC NETWORK TCP/IP SETTING Windows 95/98/ME3. Set both “IP address” and “DNS” to Automatic configuration Windows1. In the “Local area network status” window, click on “Properties.” Windows XP / Vista 1. Set “IP address” to “Obtain an IP address automatically.”2. Set “DNS” to “Obtain DNS server address automatically.” CONFIGURATION Login to the WLAN Router through Wireless LANLogin to the WLAN Router Using the Web BrowserSetup Wizard Step 3 Set LAN connection and DHCP server Step 4 Set Internet connectionThe WLAN Router will attempt to auto detect your Internet Connection Obtain IP automatically DHCP client Fixed IP Address PPPoE to obtain IP automatically PPPoE with a fixed IP address PPTP L2TP Big Pond CableAustralia Russia PPPoE Russia PPTP Step 5 Set Wireless LAN connection Step 6 Setup completedAdvanced configuration Main LAN & DHCP ServerStart IP Type an IP address to serve as the start of the IP range that DHCP will use to assign IP addresses to all LAN devices connected to the WLAN Router Password Time Dynamic DNS Wireless BasicSecurity WEP Encryption WPA/WPA2/WPA-Auto SecurityRADIUS Server WPA-PSK/WPA2-PSK SecurityAdvanced Wi-Fi Protected Setup Status Device InformationPage Log Setting Statistic WirelessMAC Address Displays the wireless client’s MAC address Routing StaticDynamic Routing Table Access FiltersMAC Filters Domain/URL Blocking Protocol/IP Filters Virtual Server Special AP Page Firewall Settings Management Remote ManagementTools RestartSettings Firmware Ping TestTECHNICAL SPECIFICATIONS GeneralPhysical and Environmental Limited Warranty TEW-652BRP3 Years