TRENDnet TEW653AP manual Troubleshooting, Windows XP/2000

Troubleshooting

How do I configure TCP/IP settings on my computer?

Windows Vista

1.Go into the Control Panel, click Network and Internet, click Network and Sharing Center, click Manage Network Connections and then right-click the Local Area Connection icon and then click Properties.

2.Click Internet Protocol Version 4(TCP/IPv4) and then click Properties. Then click on Use the following IP address, and make sure you assign your network adapter an IP address in the subnet of 192.168.10.x.

Windows XP/2000

1.Go into the Control Panel, double-click the Network Connections icon and then right-click the Local Area Connection icon and then click Properties.

2.Click Internet Protocol (TCP/IP) and then click Properties. Then click on Use the following IP address, and make sure you assign your network adapter an IP address in the subnet of 192.168.10.x.

I typed http://192.168.10.100 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TEW-653AP's web configuration page?

1.Check your hardware settings again by following the instructions in section 2

2.Make sure the wireless, LAN and power LEDs are lit.

3.Make sure the TCP/IP settings are configured properly (see first question).

4.Since the Access Point's default IP address is 192.168.10.100, make sure that no other network devices are assigned an IP address of 192.168.10.100.

5.Reset the TEW-653AP. Take a pin or paper clip and press the reset button for 15 seconds. The reset button is located on top of the TEW-653AP.

9