Manuals / TRENDnet / Computer Equipment / Network Hardware

TRENDnet TEW653AP manual Using the TEW-653AP with the TPE-111GI, Adapter

Models: TEW653AP

1 18

Download 18 pages 42.25 Kb

Page 6

Using the TEW-653AP with the TPE-111GI

Using the TEW-653AP with the TPE-111GI

1.Connect the Power Cord to the Power

Adapter.

2.Connect the Power Adapter to the DC 48V IN connector on the TPE-111GI. Then connect the Power Cord to an outlet.

3.Connect a CAT-5 cable from a switch to the TPE-111GI's DATA IN port.

4.Connect a CAT-5 cable from the TEW-653AP's LAN port to the TPE-111GI's PoE Out port.

5.Verify that the wireless, LAN and power LEDs are on. Please refer to step 4 in the Hardware Installation section.

ÐÓÑÑÊÈÉESPAÑOLDEUTSCHFRANÇAISENGLISH

4

Image 6

TRENDnet TEW653AP manual Using the TEW-653AP with the TPE-111GI, Adapter, Ðóññêèéespañoldeutschfrançaisenglish

Contents

Quick Installation Guide TEW-653AP1.01 Power-over-Ethnernet Installation Table of ContentsHardware Installation Configure the Access PointPackage Contents 1. Before You StartSystem Requirements 2. Hardware Installation 3. Power-over-Ethernet Installation Using the TEW-653AP with a PoE switchÐÓÑÑÊÈÉESPAÑOLDEUTSCHFRANÇAISENGLISH 3. Connect a CAT-5 cable from a switch to the TPE-111GIs DATA IN port Using the TEW-653AP with the TPE-111GIAdapter ÐÓÑÑÊÈÉESPAÑOLDEUTSCHFRANÇAISENGLISH4. Configure the Access Point 3. Click Wizard4. Click Next 8. Setup is successful. Click Reboot5. Select AP Mode and then click Next DEUTSCHFRANÇAISENGLISH Your configuration is completeRegister Your Product ESPAÑOL4. Align the TEW-653AP with the mounting plate 5. Mounting2. Drill holes for the screws at the marked positions on the wall 5. Follow the arrow to secure the TEW-653AP to the mounting plateTroubleshooting How do I configure TCP/IP settings on my computer? Windows VistaWindows XP/2000 1. Double check that the wireless LED on the Access Point is lit Do not turn off the SSID broadcast Wireless TipsAssign your network a unique SSID Change the channel2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them Page Allgemeine Informationen zu GPL/LGPL GPL/LGPL General InformationInformations générales GPL/LGPL Información general sobre la GPL/LGPLCertifications 1 This device may not cause harmful interferenceProduct Warranty Registration Please take a moment to register your product onlineCopyright 2009. All Rights Reserved. TRENDnet