TRENDnet TEW653AP manual Hardware Installation

2. Hardware Installation

Note: Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network. Please connect the computer configuring the TEW-653AP to the same switch/hub.

1.Run a RJ-45 cable and the power adapter through the cable clip on the TEW-653AP.

2.Connect the RJ-45 cable from the Switch/Hub to the LAN port on the Access Point.

3.Connect the Power Adapter to the Access Point and then to a power outlet.

4.Verify that the wireless, LAN and power LEDs are on.

ÐÓÑÑÊÈÉESPAÑOLDEUTSCHFRANÇAISENGLISH

2