Manuals / TRENDnet / Computer Equipment / Network Hardware

TRENDnet TEW653AP Your configuration is complete, Register Your Product, Deutschfrançaisenglish

Models: TEW653AP

1 18

Download 18 pages 42.25 Kb

Page 9

Image 9

DEUTSCHFRANÇAISENGLISH

9. Wait 24 seconds while the Access Point reboots.

10.Click System -> LAN. Configure the LAN settings to match your network settings and

then click Apply.

11.Wait 14 seconds while the Access Point reboots.

ESPAÑOL

Your configuration is complete

For detailed information regarding the TEW-653AP’sconfiguration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com.

ÐÓÑÑÊÈÉ

Register Your Product

To ensure the highest level of customer service and support, please take a moment to register your product Online at: www.trendnet.com/register

Thank you for choosing TRENDnet

Page 9

Image 9

TRENDnet TEW653AP manual Your configuration is complete, Register Your Product, Deutschfrançaisenglish, Español, Ðóññêèé

Contents

Quick Installation Guide TEW-653AP1.01 Hardware Installation Table of ContentsPower-over-Ethnernet Installation Configure the Access PointPackage Contents 1. Before You StartSystem Requirements 2. Hardware Installation 3. Power-over-Ethernet Installation Using the TEW-653AP with a PoE switchÐÓÑÑÊÈÉESPAÑOLDEUTSCHFRANÇAISENGLISH Adapter Using the TEW-653AP with the TPE-111GI3. Connect a CAT-5 cable from a switch to the TPE-111GIs DATA IN port ÐÓÑÑÊÈÉESPAÑOLDEUTSCHFRANÇAISENGLISH3. Click Wizard 4. Configure the Access Point4. Click Next 8. Setup is successful. Click Reboot5. Select AP Mode and then click Next Register Your Product Your configuration is completeDEUTSCHFRANÇAISENGLISH ESPAÑOL2. Drill holes for the screws at the marked positions on the wall 5. Mounting4. Align the TEW-653AP with the mounting plate 5. Follow the arrow to secure the TEW-653AP to the mounting plateTroubleshooting How do I configure TCP/IP settings on my computer? Windows VistaWindows XP/2000 1. Double check that the wireless LED on the Access Point is lit Assign your network a unique SSID Wireless TipsDo not turn off the SSID broadcast Change the channel2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them Page Informations générales GPL/LGPL GPL/LGPL General InformationAllgemeine Informationen zu GPL/LGPL Información general sobre la GPL/LGPL1 This device may not cause harmful interference CertificationsProduct Warranty Registration Please take a moment to register your product onlineCopyright 2009. All Rights Reserved. TRENDnet