TRENDnet TEW653AP manual Power-over-Ethernet Installation, Using the TEW-653AP with a PoE switch

ÐÓÑÑÊÈÉESPAÑOLDEUTSCHFRANÇAISENGLISH

3. Power-over-Ethernet Installation

Using the TEW-653AP with a PoE switch

1.Connect a RJ-45 cable from the Power-Over- Ethernet Switch (e.g. TRENDnet TPE-80WS) to the LAN port on the Access Point.

2.Verify that the wireless, LAN and power LEDs are on. Please refer to step 4 in the Hardware Installation section.

3