TRENDnet tv-ip400 manual Using the Camera, Web Configuration Utility

5

USING THE CAMERA

You can access and manage the camera through: 1) a web browser, and 2) the enclosed software IPView SE. This chapter describes the Web Configuration Utility, and provides the instructions on using the camera with a web browser.

Web Configuration Utility

The camera must be configured through its built-in Web-based Configuration. (Extensive knowledge of LAN will be helpful in setting up the camera.)

From the web browser, enter the default IP address to access the Welcome screen of the camera. To configure your camera, type http://192.168.0.20 in the address box. The number is the default IP address of your camera. Then, press [Enter].

NOTE: The computer’s IP address must correspond with the camera’s IP address in the same segment for the two devices to communicate.

19