TRENDnet User’s Guide
Configuring Camera Settings
The
To configure camera settings:
1.Login to the camera as described in the section Using the
2.Click ADMINISTRATION. The system status screen appears.
3.Click CONFIGURATION from the menu on the left side of the screen. The System configuration screen is displayed. You can then click any of the menu items on the left of the screen under the Configuration menu to modify settings.
TV-IP851WC / TV-IP851WIC
System
•Camera Name: This is the name used to identify your camera on your network.
•Location: You can enter a description of the place where the camera is.
•Admin: In this field you can change the administrator user name and password. (Max. password length is 8 characters)
•LED Control: Setting this to Normal will display the lights on the front of the camera indicating power and network activity. Setting this to OFF will turn off both lights on the front of the camera.
•Privacy button: When privacy feature is enabled, you can turn on and off the privacy mode by pressing the Privacy button for 5 seconds. When privacy feature is disabled, the privacy button will not take action.
Video
•Video Resolution: Select from one of the three resolutions. Higher values provide better quality but at the expense of higher bandwidth requirements on your network or Internet connection.
•Compression Rate: Select a compression rate. Higher rates of compression will reduce network load at the expense of lower image quality.
© Copyright 2013 TRENDnet. All Rights Reserved.
27
