TRENDnet TVIP322P manual Event Configuration Schedule Trigger, Event Configuration Gpio Trigger

TRENDnet User’s Guide

Event Configuration >> Schedule Trigger

You can separately configure the schedule for trigger function of the camera by Email, FTP, or Network Storage. Select the Enable option on each item, and then select a Schedule Profile from the pull-down list and set the Interval time.

NOTE If the setting value of the Network Storage Recording Time Per Event option in General Setting is longer than the Interval time in Network Storage Schedule, the recorded file will be a continuous video clip.

For example, if you set the Network Storage Recording Time Per Event as 10 seconds and the Interval as 5 seconds, recorded file becomes a non-stop video clip because the camera will record a 10-second video clip every 5 seconds.

TV-IP322P

Event Configuration >> GPIO Trigger

GPIO Trigger: Select the Enable Trigger In 1/2 option to enable the GPIO trigger function of the camera, so that you can set Trigger Out function or send captured images within the detecting area to the SD card, FTP server, email receiver, Network Storage server, or send an instant message. Event server has to be configured prior to using the functions.

-Schedule Profile: Select a schedule profile from the pull-down list.

-Action: Set the Trigger Out function or select the destination that the

captured images will be sent to: Record to SD Card, Record to Network Storage, Send Email, FTP Upload, or Instant Message.

© Copyright 2012 TRENDnet. All Rights Reserved.

31