TRENDnet User’s Guide
5.Go to Virtual Server* section and create a new entry. Enable: Click Enable
Name: Enter the application name (eg. Camera Name)
Protocol: Select TCP
Private Port: The HTTP port that you assign on your Camera.
Public Port: The port used on remote side to access to your Camera.
LAN Server: The local IP address of your Camera.
Click Add to add the application.
*Please refer to your router’s user’s manual for detail Virtual Server setting. Some router might use Port Forwarding or Special applications for this function. The setup steps should be very similar.
6.Open another web browser and enter your DDNS domain and camera’s port number.
http://yourDomainName:PortNumber
7.The camera login page will appear.
TV-IP322P
Technical Specifications
Camera
General | Sensor: 1/3” Megapixels color CMOS sensor | |
| Resolution: 1280 x 1024 pixels | |
| Board Lens | |
| Focal Length: 12mm | |
| Aperture (F/No): F1.8 | |
| Minimum illumination: 0 Lux (Night vision) | |
| Viewing Angle : | |
| | Diagonal: 28.5 degree |
| | Horizontal: 22.7 degree |
| | Vertical : 17.2 degree |
Image & Video | Compression: H.264, | |
| Exposure/white balance/gain control : automatic | |
| ||
|
| |
Audio | External microphone in | |
| Sensitivity: | |
| Frequency:50~16000Hz | |
| S/N: >60dB | |
| Format: PCM/AMR | |
|
| |
Pan/Tilt/Zoom | Protocol: Pelco D, Pelco P | |
| 32 presets | |
| Auto Patrol | |
|
| |
GPIO | Ground, GPIO in/out, RS485, 12V DC, 24V AC | |
|
| |
SD Slot | Supports SD/SDHC (up to 32GB) | |
|
|
|
Hardware |
|
|
Network | IEEE 802.3u 10/100Mbps Fast Ethernet | |
| IEEE 802.3af PoE | |
|
|
|
© Copyright 2012 TRENDnet. All Rights Reserved.
40
