Tricity Bendix BD 921 installation instructions Electronic Timer BD, To SET the Minute Minder

THE ELECTRONIC TIMER (BD 921)

Key:

CLOCK

MANUAL

TIMER

COOK TIME

END TIME

COOKING SYMBOL

AUTOMATIC

A = SELECTOR

B = SETTING KNOB

THESE STEPS MUST BE FOLLOWED BEFORE THE COOKER WILL OPERATE MANUALLY

1. TO SET THE TIME OF DAY

When first switching ON, the display will flash 00.00 and cookpot () symbol. See Fig. 1.

Turn and hold selector (A) to clock ( ). Then turn setting knob (B) until the correct time of day is shown, e.g. 13.00 (1 pm). Release both knobs, the display will stop flashing and the cookpot (-----) symbol will glow. Fig. 2. Selector (A) will

return to 'Manual'.

Note:

The clock will show the time of day as long as the oven is switched ON at the wall. The above steps must be followed every time the oven is switched OFF at the wall or if there has been a power failure.

2. TO SET THE MINUTE MINDER

Turn the selector (A) to 'Timer' 00.00 and the cookpot () symbol will glow. Fig. 3.

Using setting knob (B), turn until the required period to be timed is shown e.g. 40 mins. Fig. 4.

The minute minder will count down in one minute intervals. To check the time of day, return the selector (A) to 'Manual'.

At the end of the timed period, the timer will sound. To stop the sound, turn setting knob (B). The display will show the time of day and the cooking symbol will remain lit. If the signal is not cancelled the timer will sound for up to 2 minutes. Fig.5.

A period of up to 23 hrs 59 mins can be timed.

AN OVEN FUNCTION MUST BE SELECTED BEFORE THE OVEN WILL OPERATE WITH THE AUTOMATIC TIMER

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

36