Electrical connections

Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations.

THIS COOKER MUST BE

EARTHED.

The manufacturer declines any liability should these safety measures not be observed.

This cooker is designed to be connected to a 230-240V 50Hz AC electrical supply.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the hob rating plate. The rating plate is located on the bottom of the hob. A copy is attached on the back cover of this book.

The cooker is supplied without supply cord. A 3 core flexible supply cord must be fitted, in accordance with the specification given in the relevant tables.

☞1) Loosen the two fixing screws securing the back protective screen of the cooker, then lift

it up and remove it. This will expose the terminal block on the right bottom corner.

2)Loosen the two cable clamp screws and lift the top section of the clamp enough to allow the cable to be passed through.

3)Connect the red (live) wire to the terminal which is marked with the letter "L".

4)Connect the black (neutral) wire to the terminal which is marked with the letter "N".

5)After fitting a green or yellow/green sleeve over the bare copper wire (earth wire), connect the exposed end to the terminal which is

marked with the earth symbol or with the letter "E"coloured green and yellow.

NOTE:

The earth wire should be about 2 cm. longer than the live and neutral wires.

6)Secure the cable by means of the clamp screws and refit the back protective screen.

The cooker should be connected to a double pole switch with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations. The switch should be sited within 2m of the hob and be easily accessible upon completion of the installation.

The switch must not break the yellow and green earth cable at any point.

Ensure that the hob supply cord does not come into contact with surfaces with temperatures higher than 50 deg. C.

Supply Cable Specifications

For Uk use only

Connection

Min. size

Cable / flex

Fuse

via

Cable/flex

type

• Cooker

3 x 6 mm2

H05 VV-F

30 A

Control

Circuit

For Europe use only

Min. size Cable/flex

Cable / flex type

Fuse

3x 2.5 mm2

H05 RR-F

30 A

FO 2375

CSIE 506 X specifications

The Tricity Bendix CSIE 506 X is a freestanding cooker that combines style, versatility, and performance for the modern kitchen. With its sleek design and stainless steel finish, it fits seamlessly into any culinary environment, appealing to both aesthetic and functional aspects of contemporary cooking. This model showcases advanced technologies and features that cater to the needs of everyday cooking as well as gourmet food preparation.

One of the standout features of the CSIE 506 X is its dual-fuel capability, allowing users to enjoy the precision of a gas hob alongside the efficiency of an electric oven. This dual approach gives cooks the best of both worlds, enabling greater control over cooking temperatures while also providing uniform heat distribution for baking and roasting.

The hob itself features four gas burners, offering various flame sizes to accommodate different cooking methods, from simmering to rapid boiling. Each burner is equipped with an automatic ignition system, ensuring that users can light up the flames effortlessly and safely. This convenience is complemented by cast iron pan supports, which provide a sturdy and durable surface for all types of cookware.

Another notable feature is the spacious oven capacity, which boasts a generous cubic volume that easily accommodates large pots and trays. The oven is equipped with multiple cooking functions, including fan-assisted, conventional, and grill settings, allowing versatility that meets a range of culinary demands. The fan-assisted function promotes even heat distribution, ensuring that dishes cook uniformly, while the grill setting is perfect for achieving a crisp finish.

The Tricity Bendix CSIE 506 X also integrates practical technologies such as a fully programmable timer, allowing chefs to prepare meals with greater precision. This feature helps in meal planning by providing a degree of flexibility in managing cooking times, ensuring that food is ready precisely when it’s needed.

Moreover, the design includes an easy-to-clean enamel interior and removable oven door, making maintenance a breeze. Every aspect of the CSIE 506 X has been thought out with user convenience in mind, providing an exceptional cooking experience that meets both everyday meal needs and special occasions.

In summary, the Tricity Bendix CSIE 506 X is a feature-rich cooker that combines the power of gas cooking with the precision of electric ovens. Its robust design, versatile cooking functions, and user-friendly technologies make it an ideal choice for home cooks who demand quality, efficiency, and style in their kitchens.

Tricity Bendix CSIE 506 X manual Electrical connections, Supply Cable Specifications

Models: CSIE 506 X