7. Adding or Replacing Internal Batteries (continued)
6Remove the fuse block bracket.
7Slide the battery string with the RED cable into an empty slot within the battery compartment as shown. Make sure that the string is
oriented as shown in the diagram 7A .
Note: If the auxiliary battery connector is in the way, remove its mounting screw and position the cable to allow adequate room to add the battery strings 7B .
8Slide the battery string with the BLACK cable next to it (on the left) in the empty slot as shown. Make sure that the string is oriented as shown in the diagram 8A .
9Replace the fuse block bracket. Make sure printing on bracket is oriented so it is readable.
6 |
7 |
TERMINALS |
7A |
7B |
8 |
TERMINALS |
8A |
9 |
14
