Tripp Lite 200401086 important safety instructions Surge Suppression SPS model only, Installation

Models: 200401086

1 3
Download 3 pages 20.54 Kb
Page 1
Image 1
 PS & SPS Series™ PowerStrips
(únicamente los modelos HG)

IMPORTANT SAFETY INSTRUCTIONS. PS & SPS SeriesPowerStrips

IMPORTANT SAFETY INSTRUCTIONS.

SAVE THESE INSTRUCTIONS.

1111 W. 35th Street, Chicago, IL, 60609 • Customer Support: (773) 869-1234 • www.tripplite.com

WARNING!

Not for life support, patient contact or critical care equipment if a malfunction or failure could cause failure or significantly alter the performance of the life support device. Do not use in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

CAUTION!

NOT for use where NEC requires Hospital Grade receptacles. DO NOT connect to an ungrounded outlet. DO NOT use with extension cords or adapters that eliminate the connection to ground. The power strip is designed for indoor use only. Install the power strip away from heat emitting appliances such as radiators or heat registers. Do not install where excessive moisture or other conductive contaminants are present. Never install electrical wiring during a lightning storm.

2) Connect AC Equipment to Your Power Strip

Plug the AC power cords of your equipment into your power strip. Do not use extension cords or adapters that eliminate the connection to ground. DO NOT OVERLOAD your power strip. Each outlet can handle a load of up to the model’s amp rating, but do not exceed a total load of more than the model’s amp rating for all outlets. If the circuit breaker trips, outlets will cease to provide power. Reduce the load on the power strip down to your unit’s amp rating by unplugging excess equipment, then depress the circuit breaker button to reset and restore power.

Surge Suppression (SPS model only)

These power strips are also surge suppressors, providing 450 joules of surge suppression that protect connected devices from surges and spikes on the AC line.

SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction.)

To receive service under this warranty, you must be the original

Installation

1) Connect Your Power Strip to Your AC Power Line

PS and SPS models: Plug the power cord into a utility outlet. The power strip’s power cord should only be connected to a standard 3-wire grounded 120V AC 60 Hz outlet.

INT Models: Plug a female IEC320 power cord (not included) into both the power strip and a utility outlet. The power cord should only be connected to a grounded 230V AC, 50/60 Hz outlet.

Lifetime Limited Warranty

The seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for its lifetime. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion. Service under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th St., Chicago, IL 60609. Seller will pay return shipping charges. The warranties of all TRIPP LITE surge suppressors are null and void if they have been connected to the output of any UPS system. The warranties of all TRIPP LITE UPS Systems are null and void if a surge suppressor has been connected to its output receptacles. THIS WARRANTY DOES NOTAPPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT.

purchaser/user of the product in question. You must obtain a Returned Material Authorization (RMA) number from TRIPP LITE. Products must be returned to TRIPP LITE with transportation charges prepaid and must be accompanied by a brief description of the problem and proof of date and place of purchase.

TRIPP LITE; 1111 W. 35th St.; Chicago, IL 60609

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.

The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.

PS & SPS Series

Barras de

IMPORTANTES INSTRUCCIONES DE

 

contactos

SEGURIDAD. GUÁRDELAS.

 

 

 

 

 

 

 

 

1111 W. 35th Street, Chicago, IL, 60609 EE.UU. • Atención al cliente: 1.773.869.1234 • www.tripplite.com

¡ADVERTENCIA!

No lo utilice con dispositivos de soporte de la vida humana si un fallo o mal funcionamiento puede causar anomalías o alterar significativamente el rendimiento del dispositivo de soporte. No lo utilice en presencia de anestésicos inflamables mezclados con aire, oxígeno u óxido nitroso.

¡PRECAUCIÓN!

NUNCA conecte el equipo a una toma de corriente sin conexión a tierra. NO LO UTILICE con extensiones o adaptadores que eliminen la conexión a tierra. La barra de contactos está diseñada exclusivamente para uso en interiores. Instale la barra de contactos lejos de dispositivos que emitan calor, como radiadores o registros de calefacción. No lo instale en lugares donde exista exceso de humedad o haya posibilidad de interferencias eléctricas. Nunca instale el cableado durante una tormenta.

Instalación

1)Conecte el cable de contactos a la línea de suministro de corriente alterna

Modelos PS-415-HG, PS-615-HG y SPS-615-HG: Enchufe el cable de corriente en una toma de energía eléctrica. El cable de corriente de la barra de contactos debe conectarse a una toma estándar de 3 hilos, conectada a tierra, de 120 VCA y 60 Hz.

Nota: La fiabilidad de la toma de tierra solo puede ser lograda cuando la Regleta de Serie PS es conectada a un receptaculo equivalentemente conectado a tierra marcado “Solo Hospital” o “Calidad de Hospital.”

Modelo PS-5-INT: Enchufe un cable de corriente hembra IEC320 (no incluido) tanto en la barra de contactos como en la toma de electricidad. El cable de corriente sólo debe conectarse a una toma de energía de CA con conexión adecuada a tierra, de 230 V, 50 / 60 Hz.

2)Conecte el equipo de corriente alterna a su tomacorriente múltiple Enchufe el cordón de su equipo en su tomacorriente múltiple.

NO use cordones de extensión o adaptadores que eliminen la conexión a tierra. NO SOBRECARGUE su tomacorriente múltiple. Cada salida puede manejar una carga igual a la capacidad de su unidad, pero sin que la carga total de todas las salidas exceda a la capacidad de su unidad. Si el interruptor automático dispara, las salidas dejarán de suministrar energía. Reduzca la carga en el tomacorriente múltiple hasta la capacidad de su unidad desconectando el equipo en exceso, y luego presione el botón del interruptor automático para restablecer y restaurar la energía.

Contactos y enchufes de grado hospitalario

Las barras de contactos PS-415-HG, PS-615-HG y SPS-615-HG tienen contactos y enchufes de grado hospitalario.

Eliminación de sobretensiones

(únicamente los modelos SPS)

La barra de contactos SPS-615-HG también es un supresor de sobretensiones, proporcionando una supresión de sobretensiones de 450 joules que protege los dispositivos conectados de sobretensiones y variaciones repentinas en la línea de suministro de corriente alterna.

Garantía limitada durante la vida útil del equipo

El distribuidor garantiza que este producto, si se utiliza de acuerdo con las instrucciones aplicables, se encuentra libre de defectos originales en sus materiales y mano de obra durante toda su vida útil. Si dentro de este periodo se demuestra que el producto tiene defectos en sus materiales o mano de obra, el distribuidor reparará o cambiará el producto, a su entera discreción. El servicio proporcionado mediante esta garantía sólo podrá obtenerse si se devuelve o envía el producto (con todos los gastos de flete y transporte previamente pagados) a: Tripp Lite, 1111 W. 35th Street, Chicago, IL 60609, EE.UU. El distribuidor pagará los gastos de devolución. Las garantías de todos los supresores de sobretensiones de Tripp Lite se anularán y no serán válidas si se han conectado en los contactos de cualquier sistema UPS (no- break). Las garantías de todos los sistemas UPS de Tripp Lite serán anuladas o no serán válidas si se conecta un supresor de sobretensiones a sus contactos.

ESTA GARANTÍA NO SE APLICA AL DESGASTE NORMAL NI A LOS DAÑOS QUE SEAN RESULTADO DE ACCIDENTES, MAL USO, ABUSO O NEGLIGENCIA. LOS DISTRIBUIDORES NO OFRECEN NINGUNA OTRA GARANTÍA A LA EXPRESAMENTE ESTABLECIDA EN EL PRESENTE DOCUMENTO. CON EXCEPCIÓN DE LO EXPRESAMENTE PROHIBIDO POR LALEYAPLICABLE, TODAS LAS GARANTÍAS IMPLÍCITAS, INCLUYENDO LAS GARANTÍAS COMERCIALES O DE ADECUACIÓN, ESTÁN LIMITADAS EN SU VIGENCIA AL PERIODO DE GARANTÍA ESTABLECIDO ANTERIORMENTE; ADEMÁS, ESTA GARANTÍA EXCLUYE EXPRESAMENTE TODO DAÑO INCIDENTAL Y CONSECUENCIAL (algunos estados no permiten la limitación de la vigencia de la garantía implícita; además, algunos estados no permiten la exclusión o limitación de los daños incidentales o consecuenciales, por lo que las limitaciones o exclusiones señaladas anteriormente no se aplicarán en tales casos. Esta garantía otorga derechos legales específicos, aunque se pueden tener además otros derechos que variarán de una jurisdicción a otra).

Para recibir el servicio establecido por esta garantía, se debe ser el usuario o comprador original del producto en cuestión. Deberá obtener de TRIPP LITE un número de autorización de devolución de material (RMA). Los productos deberán devolverse a TRIPP LITE con los cargos de transporte previamente pagados y acompañados de una descripción breve del problema encontrado, así como de los documentos probatorios de la fecha y lugar de compra.

TRIPP LITE; 1111 W. 35th St.; Chicago, IL 60609; EE.UU.

ADVERTENCIA: El usuario deberá tener el cuidado de determinar si el dispositivo es apropiado, adecuado o seguro para el uso al que lo tiene destinado, antes de utilizarlo. Dado que las diferentes aplicaciones están sujetas a una enorme variación, el fabricante no puede garantizar que el equipo se adapte o sea apropiado para cualquier aplicación.

La política de Tripp Lite es de mejora continua. Las especificaciones están sujetas a cambios sin previo aviso.

Page 1
Image 1
Tripp Lite 200401086 important safety instructions Important Safety Instructions Save These Instructions, Installation