Tripp Lite 200812163 warranty Feature Identification

Feature Identification

Identify the premium features on your specific model and quickly locate instructions on how to maximize their use.

1 Configuration DIP Switches: optimize Inverter/Charger operation depending on your application. See Configuration section for setting instructions.

2Operating Mode Switch: controls Inverter/Charger operation.

The "AUTO/REMOTE" setting ensures your equipment receives constant, uninterrupted AC power. It also enables the Inverter/ Charger to be remotely monitored and controlled with an optional remote module (Tripp Lite model APSRM4, sold sepa- rately). The "CHARGE ONLY" setting allows your batteries to return to full charge faster by turning the inverter off which halts battery discharging. The "DC OFF" setting de-energizes the unit and connects AC OUT to AC IN. See Operation section for set- ting instructions.

3"LINE", "INVERT", "LOAD" LEDs: show whether the

Inverter/Charger is operating from AC line power or DC battery power. It also warns you if the connected equipment load is too high. See Operation section for instructions on reading the indi- cator lights.

4"BATT VOLTAGE" LEDs: these three lights will turn ON in several sequences to show approximate battery level. See Operation section for instructions on reading the indicator lights.

5DC Power Terminals: connect to your battery terminals. See Battery Connection section for instructions.

6AC Output Receptacles

7A AC Input Receptacle (230V Models): attach input cord to con- nect the Inverter/Charger to any source of utility- or generator- supplied AC power. The user must provide an appropriate country-specific input cable for 230V Models. See AC Input/ Output Connection section for instructions.

7B AC Input Cord (120V Models): plug the Inverter/Charger into a utility- or generator-supplied AC power outlet.

8Resettable Circuit Breakers: protect your Inverter/Charger against damage due to overload or charger failure. See Operation sec- tion for resetting instructions.

9Remote Control Module Connector: allows remote monitoring and control with an optional module (Tripp Lite model APSRM4, sold separately). See remote module owner’s manual for con- nection instructions.

10Main Ground Lug: properly grounds the Inverter/Charger to vehicle grounding system or to earth ground. See Configuration section for instructions.

11Cooling Fan: quiet, efficient fan prolongs equipment service life.

1	4	9	3	2
					1	4	9	3	2

	8
	8
11	11

		6		6
5		10	5
	7A		7B	10
Front View (230V Non-Corded Models)			Front View (120V Corded Models)

3