Tripp Lite 220/230/240V Input/Output owner manual Procedure

Battery Replacement

Under normal conditions, the original batteries in your UPS will last many years. See "Important Safety Instructions" before replacing batteries. The batteries are designed for hot- swap replacement (i.e. leaving the UPS in ON mode), but some qualified service personnel may wish to put the UPS in the OFF mode and disconnect equipment before proceeding.

Procedure

1Remove Front Panel

2Disconnect Batteries

3Remove/Dispose of Batteries

4Add Batteries

5Connect Batteries

Attach connectors: black- to-black and red-to-red.

6Replace Front Panel

1	￿
	6

￿2	￿
	5

￿3 4

13