Specifications (continued)
Model: SU30K3/3
Input
Input Voltage | 120/208V AC, 3ø, 4 Wire (plus ground), wye |
Input Frequency | 60 Hz ± 3 Hz |
Voltage Correction Range | |
Input Current (Per Phase, | 90A |
Inrush Current | <300A |
Power Factor (Full Load) | >0.95 |
Efficiency (Full | >89% |
Circuit Breaker | 200A (3p) |
Input Bypass Circuit Breaker | 200A (3p) |
|
|
Output |
|
VA | 30000 |
Watts (Power Factor: 0.8) | 24000 |
Waveform | Sinewave |
Waveform | Sinewave |
Output Voltage (RMS) | 120/208V AC, 3ø, 4 Wire (plus ground), wye |
Output Frequency | 60 Hz (± 0.1 Hz on battery) |
Voltage Regulation | ±2% |
Max. Harmonic Distortion |
|
<5% | |
Overload Capabilities | <102% (continuous), 102%~125% (1 min.), |
| 125%~150% (30 sec.), >150% (2 sec.) |
Short Circuit Capability | >250A |
Crest Factor | 3:1 |
|
|
Battery |
|
Battery Type | Sealed, Lead Acid, 240V DC, 9AH |
Battery Pack Quantity | Three Packs (20 12V DC Batteries per pack) |
Protection | Six |
| cartridge fuses (two per battery pack) and |
| fuse block (1 per battery pack) |
Typical Backup Time (Half Load) 13 min. +
Typical Backup Time (Full Load) 5 min. +
Operation
(Line to Battery, Battery to Line) 0 ms
Audible Noise (Full Load @ 1 meter) <65 dBA
Indicators
Includes an LCD Display and LEDs (AC Line In, Bypass Line In, AC to DC, DC to AC, AC Output, Battery
Communications
Includes an
Connections
Input Terminal Block | 100A |
Output Terminal Block | 100A |
|
|
Physical Specifications |
|
Unit Dimensions (H x W x D) | 35.3 x 19.3 x 36 in. |
Unit Weight | 662 lb. |
Shipping Dimensions (H xW x D) 43 x 28 x 44.5 in.
Shipping Weight | 750 lb. |
Model: SU30K3/3XR5
Input
Input Voltage | 120/208V AC, 3ø, 4 Wire (plus ground), wye |
Input Frequency | 60 Hz ± 3 Hz |
Voltage Correction Range | |
Input Current (Per Phase, | 90A |
Inrush Current | <300A |
Power Factor (Full Load) | >0.95 |
Efficiency (Full | >89% |
Circuit Breaker | 200A (3p) |
Input Bypass Circuit Breaker | 200A (3p) |
|
|
Output |
|
VA | 30000 |
Watts (Power Factor: 0.8) | 24000 |
Waveform | Sinewave |
Waveform | Sinewave |
Output Voltage (RMS) | 120/208V AC, 3ø, 4 Wire (plus ground), wye |
Output Frequency | 60 Hz (± 0.1 Hz on battery) |
Voltage Regulation | ±2% |
Max. Harmonic Distortion |
|
<5% | |
Overload Capabilities | <102% (continuous), 102%~125% (1 min.), |
| 125%~150% (30 sec.), >150% (2 sec.) |
Short Circuit Capability | >250A |
Crest Factor | 3:1 |
|
|
Battery |
|
Battery Type | Sealed, Lead Acid, 240V DC, 9AH |
Battery Pack Quantity | Five Packs (20 12V DC Batteries per pack) |
Protection | Ten |
| cartridge fuses (two per battery pack) and |
| fuse block (1 per battery pack) |
Typical Backup Time (Half Load) 25 min. +
Typical Backup Time (Full Load) 11 min. +
Operation
(Line to Battery, Battery to Line) 0 ms
Audible Noise (Full Load @ 1 meter) <65 dBA
Indicators
Includes an LCD Display and LEDs (AC Line In, Bypass Line In, AC to DC, DC to AC, AC Output, Battery
Communications
Includes an
Connections
Input Terminal Block | 100A |
Output Terminal Block | 100A |
|
|
Physical Specifications |
|
Unit Dimensions (H x W x D) | 48.5 x 19.3 x 36 in. |
Unit Weight | 935 lb. |
Shipping Dimensions (H xW x D) 61.5 x 31 x 44.5 in.
Shipping Weight | 1152 lb. |
+ Backup times are expandable with additional Battery Packs, sold separately. The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the marking name or model number of the product.
FCC Specifications for Models with FCC Approval:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The user must use shielded cables and connectors with this product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
18
