200310077
3:32 PM Page 13
Specifications
| The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice. |
|
|
| |||
|
|
|
|
|
|
|
|
| Model: | SMART500RT1U | SMART750RM1U | SMART1000RM1U | SMART1000RM2U |
|
|
| Series #: | AGSM52SRM1U | AGSM7501UPC | AGSM10001UPC | AGSU1022U31 |
|
|
|
|
|
|
|
|
|
|
| Input |
|
|
|
|
|
|
| Nominal Voltage/Frequency: | 120VAC/60 Hz | 120VAC/60 Hz | 120VAC/60 Hz | 120VAC/60 Hz |
|
|
| Recommended Dedicated |
|
|
|
|
|
|
| Electrical Circuit: | 15 amp | 15 amp | 15 amp | 15 amp |
|
|
|
|
|
|
|
|
|
|
| Output |
|
|
|
|
|
|
| Capacity (VA/Watts): | 500/300 | 750/450 | 1000/640 | 1000/700 |
|
|
| On Line Nominal Voltage/Waveform: | 120VAC/sine wave | 120VAC/sine wave | 120VAC/sine wave | 120VAC/sine wave |
|
|
| On Battery Nominal |
|
|
|
|
|
|
| Voltage/Waveform: | 115VAC/PWM sine wave | 120VAC/sine wave | 120VAC/sine wave | 120VAC/sine wave |
|
|
| Battery Runtime |
|
|
|
|
|
|
| (Half Load/Full Load) Minutes*: | 14/4 | 24/7 | 25/10 | 21/9 |
|
|
| Battery Recharge Time*: |
|
| ||||
| FCC: | Class B | Class A | Class A | Class B |
|
|
| Approvals: | UL, cUL, NOM | UL, cUL, NOM | UL, cUL, NOM | UL, cUL, NOM |
|
|
| Model: | SMART1500RM2U | SMART1500RMXL2Ua | SMART2200RMXL2U | SMART2600RM2U | SMART3000RM2U | |
| Series #: | AGSU1522U31 | AGSU152XU31 | AGSU2222U31 | AGSU3022U31 | AGSU3022U31 | |
|
|
|
|
|
|
|
|
| Input |
|
|
|
|
|
|
| Nominal Voltage/Frequency: | 120VAC/60 Hz | 120VAC/60 Hz | 120VAC/60 Hz | 120VAC/60 Hz | 120VAC/60 Hz | |
| Recommended Dedicated |
|
|
|
|
|
|
| Electrical Circuit: | 15 amp | 15 amp | 20 amp or 15 amp* | 30 amp or 20 amp* | 30 amp or 20 amp* | |
|
|
|
|
|
|
|
|
| Output |
|
|
|
|
|
|
| Capacity (VA/Watts): | 1500/1000 | 1500/1000 | 2200/1600 * | 2600/2100 | 3000/2250 |
|
|
|
|
| (with 20 amp plug) | (with 30 amp plug) | (with 30 amp plug)* | |
|
|
|
| 1440/1307 * | 2200/1787 | 2200/1787 |
|
|
|
|
| (with 15 amp plug) | (with 20 amp plug) | (with 20 amp plug)* | |
| On Line Nominal |
|
|
|
|
|
|
| Voltage/Waveform: | 120VAC/sine wave | 120VAC/sine wave | 120VAC/sine wave | 120VAC/sine wave | 120VAC/sine wave | |
| On Battery Nominal |
|
|
|
|
|
|
| Voltage/Waveform: | 120VAC/sine wave | 120VAC/sine wave | 120VAC/sine wave | 120VAC/sine wave | 120VAC/sine wave | |
| Battery Runtime (Half Load/ |
|
|
|
|
|
|
| Full Load) Minutes*: | 25/10 | 25/10+ | 20/8+ | 18/6+ | 13/4+ |
|
| Battery Recharge Time*: |
| |||||
| FCC: | Class B | Class B | Class A | Class A | Class A |
|
| Approvals: | UL, cUL, NOM | UL, cUL, NOM | UL, cUL, NOM | UL, cUL, NOM | UL, cUL, NOM |
|
ALL UNITS:
+Battery runtime can be extended with addition of optional Tripp Lite External Battery Packs (sold separately). SMART1500RMXL2Ua models use
* Since these models include two plug options, the amperage of the recommended circuit would change to match the amperage of the plug. The output capacity would also change based on the plug type used. SMART2200RMXL2U features a
FCC RADIO/TV INTERFERENCE NOTICE: (FOR CLASS A MODELS)
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. Operation of this equipment is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The user must use shielded cables and connectors with this product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC RADIO/TV INTERFERENCE NOTICE: (FOR CLASS B MODELS)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference using one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and the receiver; connect the equipment into an outlet on a circuit different from that which the receiver is connected; consult the dealer or an experienced radio/television technician for help. The user must use shielded cables and connectors with this product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC rules. Operation is subject to the following 2 conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Note on Labeling
Two symbols are used on the label.
V~ : AC Voltage
V 
: DC Voltage
13
