Tripp Lite 350, 525 Plug the UPS into an outlet on a dedicated circuit, Turn the UPS on

200310077 93-2200 Sinewave SmartPro Rackmount UPS Owner’s Manual.qxd 10/21/2003

3:32 PM Page 5

Quick Installation

1Plug the UPS into an outlet on a dedicated circuit.*

NOTE! after you plug the UPS into a live AC out- let, the UPS will automatically charge its batter- ies,** but will not supply power to its outlets until it is turned ON (see Step 3 below).

*See Specifications for circuit amperage requirements. Select models include an additional plug which can be switched by a qualified elec- trician. See Specifications for details. ** The BATTERY CHARGE LED will be the only LED illuminated.

1

SMART2200RMXL2U plug

(NEMA 5-20P) shown

2Plug your equipment into the UPS.*

* Your UPS is designed to support only computer equipment. You will overload the UPS if the total VA ratings for all the equipment you con- nect exceeds the UPS's Output Capacity (see Specifications). To find your equipment's VA ratings, look on their nameplates. If the equip- ment is listed in amps, multiply the number of amps by 120 to deter- mine VA. (Example: 1 amp × 120 = 120 VA). If you are unsure if you have overloaded the UPS's outlets, see “OUTPUT LOAD LEVEL” LED description.

3Turn the UPS ON.

Press and hold the “POWER” button for one second. The alarm will beep once briefly after one second has passed. Release the button.

2

SMART3000RM2U shown

3

5