Tripp Lite APS 612 Note on Labelling, V~ V, Specifications, Factory default setting, Model

Specifications

MODEL:	APS612
SERIES:	AGAP60012MVJ
Weight:	38.0 lbs.
INVERTER
Continuous power (@ 20° C):	600 W
Surge power:	1200 W
Efficiency (Full Load):	90%
Minimum/Maximum DC Fuse Rating:	100A/200A
DC Input Current @ Nominal V DC
Full Load	56 A
Nominal Input Volts:	12 VDC
DC Input Voltage Range:	10-15 VDC
Nominal Output Volts:	120 VAC ±5%
Nominal Output Frequency:	60 Hz ±.3%
BATTERY CHARGER
Charging Capacity DC:	20A
Maximum Cable Length	20 ft.
Absorption Volts VDC:	Selectable
	14.4 V*/14.2 V Wet*/Gel
Float Volts VDC (wet/gel):	13.3 V (13.6 V)
Input Voltage AC:	120 V
Input Current AC:	4.2 A
LINE VAC OPERATION
Minimum Input AC Volts:	Selectable 75*,85, 95, or 105 VAC
Maximum Input AC Volts
(Continuous, Charger at Maximum):	Selectable 135* or 145 VAC
Maximum Input Current
(Continuous, Charger at Maximum):	9.5 A
Input Frequency:	60 Hz ±3%
Maximum Output AC (Continuous)	5 A
Automatic Transfer Time:	<25 ms

* Factory default setting.

Note on Labelling

Two symbols are used on the APS labels.

V~

V

:AC Voltage

:DC Voltage

13