Tripp Lite B119-4X4, B119-2X2 owner manual Output

Standard Installation

6Connect the first HDMI display to the port on the switch marked

Output 1.

Note: The HDMI cable connecting the switch to a display must be no longer than 25 ft.

7Repeat step 6 to connect additional displays to the remaining ports.

8Turn on the power to the connected devices. The video image should now be displayed on the connected monitors.

9Press the switch next to each set of Output LEDs to switch the source being displayed on the corresponding Output monitor. You can also use the included remote control to switch between sources. As with the switch next to the Output LEDs, press the button on the remote control

of the desired Output port to switch the source being displayed.

Note: The same 4 button remote control comes with both the B119-2X2 and B119-4X4. Buttons 3 and 4 will not be used for the B119-2X2.

See the RS-232 Serial Control section in this manual for details on controlling the switch using Terminal Emulation Software.

5

13-08-038-9332BC.indd 5 8/5/2013 12:26:37 PM