Tripp Lite RMX 1000-2000 VA Suggested Rackmount Installation for the SM1000RMX, Mounting

200208099 93-2040 SM1000RMX Owner’s Manual.qxd 9/12/2002 3:53 PM Page 3

Mounting

Your UPS may be rackmounted in 4- or 2-post racks using these suggested mounting procedures. These procedures are for common rack types and may not be appropriate for all rack configurations. User must determine the fitness of rackmount hardware and procedures before mounting.

Suggested Rackmount Installation for the SM1000RMX

1Attach mounting ears (A) to the front mounting holes of the UPS (B) using the screws pro- vided (C).

2Have an assistant lift the UPS and hold it in position with the mounting ears flush against the rack’s side supports. Mount the UPS by screwing user-supplied rack bolts (D) through its mounting ears, and into the rack’s side supports.

	B
	C
1	A

D

2

Suggested 4-Post Rackmount Installation for the SM2000RMX

1Connect the three segments of each shelf (A) using the included screws, nuts and washers

(B). Leave the screws slightly loose so that the shelves can be adjusted in the next step.

2Adjust each shelf to fit your rack, then mount them in the lowest available space of your rack with with the screws, nuts and washers provided (C). Note that the support ledges should face inward. Tighten the screws that connect the shelf segments (B).

B

A

1

C

B

2

3