Tripp Lite RMX 1000-2000 VA owner manual Mounting continued

200208099 93-2040 SM1000RMX Owner’s Manual.qxd 9/12/2002 3:53 PM Page 4

Mounting continued

3Attach mounting ears (D) to the front mounting holes of your UPS (E) using the screws provided

(F). Do not attach the mounting ears to your equipment’s middle holes.

E

DF

3

4Using an assistant if necessary, lift your equipment and slide it onto the mounting shelves. Attach your equipment to the rack by passing the user-supplied screws, nuts and washers (G) through its mounting ears and into the rack rails.

G

4

Suggested 2-Post Rackmount Installation for the SM2000RMX

1Attach the four mounting shelf segments shown (A) to both rack posts (B) with the screws, nuts and washers provided (C). Note that the side supports should face inward.

2Attach mounting ears (D) to the middle mounting holes of your UPS (E) using the screws and washers provided (F). Do not attach the mounting ears to your equipment’s front holes.

3Using an assistant if necessary, lift your UPS and slide it onto the mounting shelves. Attach your UPS to the rack by passing the user-sup- plied screws, nuts and washers (G) through its mounting ears and into the rack rails.

B

A

C

1

E

D	F
2
G
3

4