Tripp Lite RMX 1000-2000 VA Connection optional, 1 DB9 Port Connection, USB Port Connection

200208099 93-2040 SM1000RMX Owner’s Manual.qxd 9/12/2002 3:53 PM Page 6

Connection optional

Your UPS will function properly without these connections.

1DB9 Port Connection

Using the DB9 cable provided, connect a DB9 port on your computer to a DB9 port on your UPS. Install the Tripp Lite power protection software appropriate to its operating system. If your UPS has two DB9 ports, a second computer with a DB9 port may be connected if desired.

2USB Port Connection

Using the USB cable provided, connect a USB port from a computer to a USB port on your UPS. Install the Tripp Lite power protection software appropriate to its operating system. If your UPS has two USB ports, a second computer with a USB port may be connected if desired.

3EPO Port Connection (Select Models Only)

Using the RJ11 cable provided, connect the Emergency Power Off (EPO) port of your UPS to a user-supplied normally closed or normally open switch according to the circuit diagram below. The EPO port is not a phone line surge suppressor; do not connect a phone line to this port.

1

SM1000RMX shown

2

SM1000RMX shown

3

SM2000RMX shown

(UPS will turn off if EPO cord is cut or EPO plug is disconnected)

EPO Circuit Diagrams

6