Tripp Lite SMARTINT2200VS, SMARTINT3000VS owner manual Quick Installation, Turn the UPS ON

Quick Installation

1 Insert a user-supplied power cord (with country-specific plug) into the UPS System’s IEC-320-C20 AC Input Receptacle. Plug the cord into an AC wall outlet.

NOTE! After you plug the UPS into a live AC outlet, the UPS (in “Standby” mode) will automatically charge its batteries, but will not supply power to its outlets until it is turned ON.

2Using the jumper cords supplied with the UPS, plug your equipment into the UPS.*

* Order additional jumper cords from Tripp Lite. Call (773) 869-1234; order part # P004-006. Your UPS is designed to support only com- puter equipment. You will overload the UPS if the total VA ratings for all the equipment you connect exceeds the UPS's Output Capacity (see Specifications). To find your equipment's VA ratings, look on their nameplates. If the equipment is listed in amps, multiply the number of amps by 230 to determine VA. (Example: 1 amp × 230 = 230 VA). If you are unsure if you have overloaded the UPS’s outlets, see “OUTPUT LOAD LEVEL” LED description.

1

Shown: SMARTINT2200VS

2

3

Turn the UPS ON.

Press and hold the “ON/OFF/STANDBY” button for one second. The alarm will beep once after one second has passed. Release the button.

3

3