Prestige 1100 Internet Access Router
Chapter 2:
Hardware Installation & Initial Setup
2.1Unpacking your Bridge/Router
This chapter explains how to connect to the hardware and to perform the initial setup. Before installing be sure that all components listed with the enclosed packing slip are included.
2.2Additional Installation Requirements
In addition to the contents of your package, there are other hardware and software requirements you need before you can install and use your Prestige. These requirements include:
lA computer with Ethernet
lA computer equipped with communications software configured to the following parameters:
ØVT100 terminal emulation.
Ø9600 Baud.
ØNo parity, 8 Data bits, 1 Stop bit.
ØFlow Control set to None.
After the Prestige is properly set up, you can make future changes to the configuration through telnet connections.
Hardware Installation & Initial Setup |
