ZyXEL Communications P-1100 manual IPX Remote Node Setup, Menu 11.3 Remote Node Novell IPX Options

Prestige 1100 Internet Access Router

6.4.1 IPX Remote Node Setup

Follow the procedure in Chapter 5 to configure the protocol-independent parameters in Menu 11.1 - Remote Node Profile. For the IPX-related parameters in Menu 11.3 - Remote Node Network Layer Options, follow the instructions below.

To edit Menu 11.3 - Remote Node Network Layer Options shown in Figure 6-5, follow these steps:

In Menu 11.1, make sure [IPX] is among the protocols in the Route field. (The Route field should display Route = IPX or Route = IP + IPX.)

Move the cursor to the [Edit IP/IPX/Bridge] field, then press the space bar to toggle and set the value to [Yes], and press [ENTER] to edit Menu 11.3 - Network Layer Options.

Menu 11.3 - Remote Node Network Layer Options

IP Options:	IPX Options:
Rem IP Addr:	Rem LAN Net #= 00000000
Rem Subnet Mask= N/A	My WAN Net #= 00000000
My WAN Addr= N/A	Hop Count= 1
Single User Account= N/A	Tick	Count= 2
Server IP Addr= N/A	W/D	Spoofing(min)= 3
Metric= N/A	SAP/RIP Timeout(min)= 3
Private= N/A
RIP Direction= N/A	Bridge Options:
Version= N/A	Ethernet Addr Timeout(min)= N/A
Multicast= IGMP-v2
IP Policies=

Enter here to CONFIRM or ESC to CANCEL:

Figure 6-5 Menu 11.3 - Remote Node Novell IPX Options

6-6 IPX Configuration