ZyXEL Communications P-1100 Ethernet SUA, Single User Account Menu Fields, Field Description

Prestige 1100 Internet Access Router

To enable the SUA feature in Menu 4, move the cursor to the Single User Account field and select [Yes] (or [No] to disable SUA). Then follow the instructions on how to configure the SUA fields in the following table.

Table 3-5 Single User Account Menu Fields

Field

Description

Single User Account	Select [Yes] to enable SUA.
My IP Addr.	If your ISP did not assigns you a static IP address, enter [0.0.0.0];
	otherwise, enter that IP address here.

Press [ENTER] at the message [Press ENTER to Confirm ...] to save your configuration, or press [ESC] at any time to cancel.

3.6.3 Ethernet SUA

The Single User Account (SUA) feature can also apply to Ethernet ports. This feature is useful if you connect a broadband device such as a xDSL modem or cable modem via the Ethernet port. As there can be only one interface to the Internet at any one time you should not enable both the WAN SUA (Menu 4) and Ethernet SUA (Menu 3.2) at the same time. In the example in Figure 3-6 Ethernet SUA, the ADSL modem is configured as a bridge, so the DHCP server – Ethernet connection is equivalent to a LAN-to-LAN connection. When [DHCP=] [Client] on the Ethernet in Menu 3.2, then the Prestige will request an IP address from the DHCP server as shown. Address translation takes place when [SUA= ][Yes] (in Menu 3.2). The Single User Account (SUA) feature in Menu 3.2 applies solely to the Ethernet interface.

	Ethernet		DSL/
			ATM
		ADSL Modem
Prestige			DHCP
			Server
1100

Figure 3-6 Ethernet SUA Example

3-10 Internet Access