ZyXEL Communications P-1100 manual Bridge Static Route Setup, Bridge Static Route Menu Fields

Prestige 1100 Internet Access Router

7.2.2 Bridge Static Route Setup

Similar to network layer static routes, a bridging static route tells the Prestige 1100 about the route to a node before a connection is established. You configure bridge static routes in Menu 12.3.1(go to Menu 12, choose option 3, then choose a static route to edit) as shown in Figure 7-3.

Menu 12.3.1 - Edit Bridge Static Route

Route #: 21

Route Name=

Active= Yes

Ether Address= ?

IP Address=

Press ENTER to CONFIRM or ESC to CANCEL:

Figure 7-3 Menu 12.3.1 - Edit Bridge Static Route

The following Table 7-2 describes the Bridge Static Route Menu.

	Table 7-2 Bridge Static Route Menu Fields
Field	Description
Route #	This is the index number of the route as listed in Menu 12.3 – IPX Static Route
	Setup.

Route Name

Enter a name for the bridge static route for identification purposes.

Active	Indicates whether the static route is active or not.
Ether Address	Enter the MAC address of the destination machine that you wish to bridge the
	packets to
IP Address	If available, enter the IP address of the destination machine that you wish to
	bridge the packets to.

Once you have completed filling in this menu, press [ENTER] at the message [Press ENTER to Confirm…] to save your configuration, or press [ESC] to cancel.

7-4 Bridge Setup