ZyXEL Communications P-1100 manual System Status, Menu 24.1 System Maintenance Status

Prestige 1100 Internet Access Router

12.1 System Status

The first selection, System Status gives you the status and statistics of the ports, as shown below. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you information on WAN port status, number of packets sent and number of packets received.

To get to the System Status, select number 24 to go to Menu 24 - System Maintenance. From this menu, select number 1, System Status.

The following figure shows the fields present in Menu 24.1 - System Maintenance - Status. It should be noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.

		Menu 24.1 -- System Maintenance – Status
Status	TXPkts	RXPkts	Errors	Tx(Byte/s)	Rx(Byte/s)	Up Time
Down	0	0	0	0	0	0:00:00
WAN	IP Addr:
Ethernet 1:					Ethernet 2:
Status: 100M/Half Duplex					Status: 100M/Half Duplex
TX Pkts: 52					TX Pkts: 52
RX Pkts: 537					RX Pkts: 537
Collisions:		0			Collisions:	0
				Press Command:
	COMMANDS: 1- Drop Port 9- Reset Counters					ESC-Exit

Figure 12-2 Menu 24.1 - System Maintenance – Status

The following table describes the fields present in Menu 24.1 - System Maintenance - Status.

12-2 System Maintenance