ZyXEL Communications P-1100 manual Dhcp=

Prestige 1100 Internet Access Router

Menu 3.2 - TCP/IP and DHCP Ethernet Setup

DHCP Setup:

DHCP= None

Client IP Pool Starting Address= N/A

Size of Client IP Pool= N/A

Primary DNS Server= N/A

Secondary DNS Server= N/A

TCP/IP Setup:

IP Address= 192.168.1.1

IP Subnet Mask= 255.255.255.0

RIP Direction= Both

Version= RIP-2B

Multicast = IGMP-v2

IP Policies=

SUA= No

Enter here to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Figure 3-2 Menu 3.2 - TCP/IP and DHCP Ethernet Setup

Table 3-1 DHCP Ethernet Setup Menu Fields

Field	Description	Example
DHCP Setup
DHCP=	This field enables/disables the DHCP server or client. If it is set	[None](default)
	to [Server], your Prestige will act as a DHCP server. If set to	[Server]
	[None], the DHCP server will be disabled. If set to [Client], the
	Prestige will request an IP address from the Ethernet that has	[Client]
	this field set to [Client. ]The Ethernet that has this field set to
	[Client ]also has multicast support ([Multicast= None]) disabled.
	When DHCP [Server] is used, the following items need to be
	set:
Client IP Pool Starting	This field specifies the first of the contiguous addresses in the	192.168.1.33
Address	IP address pool.
Size of Client IP Pool	This field specifies the size, or count, of the IP address pool.	6
Primary DNS Server	Enter the IP addresses of the DNS servers. The DNS servers
Secondary DNS	are passed to the DHCP clients along with the IP address and
	the subnet mask.
Server

3-4 Internet Access