ZyXEL Communications P-1100 manual 65535

Prestige 1100 Internet Access Router

Field	Description	Option
Destination:	Enter the destination port of the packets that you wish to filter.	0-65535
Port #	The range of this field is 0 to 65535. This field is a don’t-care
	if it is 0.
Destination:	Select the comparison to apply to the destination port in the	[None]/[Less]/[Greater]/
Port # Comp	packet against the value given in Destination: Port #.	[Equal]/[Not Equal]
Source: IP	Enter the source IP Address of the packet you wish to filter.	IP Address
Addr	This field is a don’t-care if it is 0.0.0.0.
Source: IP	Enter the IP subnet mask to apply to the Source: IP Addr.	IP Mask
Mask
Source: Port #	Enter the source port of the packets that you wish to filter. The	0-65535
	range of this field is 0 to 65535. This field is a don’t-care if it
	is 0.
Source: Port #	Select the comparison to apply to the source port in the	[None]/[Less]/[Greater]/
Comp	packet against the value given in Source: Port #.	[Equal]/[Not Equal]
TCP Estab	This field is applicable only when IP Protocol field is 6, TCP. If	[Yes]/[No]
	yes, the rule matches only established TCP connections; else
	the rule matches all TCP packets.
More	If yes, a matching packet is passed to the next filter rule	[Yes]/[ N/A]
	before an action is taken; else the packet is disposed of
	according to the action fields.
	If More is [Yes], then Action Matched and Action Not Matched
	will be [N/A].
Log	Select the logging option from the following:
	• [None] – No packets will be logged.	[None]
	• [Action Matched] - Only packets that match the rule	[Action Matched]
	parameters will be logged.	[Action Not Matched]
	• [Action Not Matched] - Only packets that do not match
		[Both]
	the rule parameters will be logged.
	• [Both] – All packets will be logged.
Action	Select the action for a matching packet.	[Check Next Rule]
Matched		[Forward]
		[Drop]
Action Not	Select the action for a packet not matching the rule.	[Check Next Rule]
Matched		[Forward]
		[Drop]

Once you have completed filling in Menu 21.1.1 - TCP/IP Filter Rule, press [ENTER] at the message [Press Enter to Confirm] to save your configuration, or press [ESC] to cancel. This data will now be displayed on Menu 21.1 - Filter Rules Summary.

Filter Configuration 8-9